LG DLG2302

Available documentation

Error codes (4)

Service modes (10)

• Diagnostic Test - Door Switch / Lamp Test["During any diagnostic step, open the door.","Display shows 'dE' or 'Error'.","Motor & Heater Off…
• Diagnostic Test - Step 1 (Electric Control & Temperature Sensor)["Enter Diagnostic Test Mode.","Do not press START/PAUSE (no press).","Display shows 'LQC Test'."]
• Diagnostic Test - Step 2 (Motor Test)["Enter Diagnostic Test Mode.","Press START/PAUSE once.","Motor runs."]
• Diagnostic Test - Step 3 (Moisture Sensor Test)["Enter Diagnostic Test Mode.","Press START/PAUSE twice.","Displays moisture sensor measured value…
• Diagnostic Test - Step 4 (Motor + Heater Test)["Enter Diagnostic Test Mode.","Press START/PAUSE three times.","Electric type
• Diagnostic Test - Step 5 (Motor + Half Heater Test)["Enter Diagnostic Test Mode.","Press START/PAUSE four times.","Electric type
• Diagnostic Test - Step-by-step operation["Enter Diagnostic Test Mode.","Press START/PAUSE once: checks electric control and temperature…
• Diagnostic Test Mode["Unit must be in Standby (unit plugged in, display off).","Press POWER while pressing MORE TIME…
• Diagnostic Test Mode (QC Test)["Unit must be in Standby mode (unit plugged in, display off).","Press POWER while pressing MORE…
• QC Test Mode["Enter diagnostic test mode.","7-SEG display shows 18:88 in QC-Test mode."]

Full entry steps, exit procedures, and test sequences are available in Max.