Model reference
Magic Chef 85RW-3BK
Cooktop
5 documents46 error codes12 service modes
Available documentation
Tech Sheet
- Instruction Sheet - 97561924 pg
- TECH SHEET - 8301596 - Rev A10 pg
- TECH SHEET - KA Range KDRP467KSS0310 pg
- Tech Sheet - 97600928 pg
Other
- Instruction Sheet - 9757347 - Rev A4 pg
MyPros+ Max
Diagnose your Magic Chef 85RW-3BK.
- Step-by-step diagnostics from the service manual
- Test values, resistance specs, and wiring references
- Verified part numbers when replacement is needed
Start diagnosing
$29/month · Cancel anytime · Or $9.95 3-day pass · Plus applicable tax
Error codes (46)
CodeMeaning
:Power failure indicationF0Default F codeF0-E0Default F codeF01Temperature sensor opened (open circuit in oven temperature sensor).F02Welded element relays (element relay contacts fused closed).F03EEPROM error in electronic control.F05Door or latch problems (mechanical or electrical fault in door latch assembly).F06Electronic control malfunction.F1Electronic control malfunction.F1 E0EEPROM communications error.F1 E1EEPROM checksum failure.F1 E2UL A/D error(s).F1-E0Key held down too long or key is shorted.F1-E1Keypad keytail not connected.F1-E3Fuel type (gas/electric) select failureF1-E5CANCEL key drive line open.F1-E6CANCEL key drive line open.F2Touch panel failure.F2 E0Shorted key.F2 E1Keytail unplugged.F2-E0Temperature sensor opened (R=2875 ohm by spec).F2-E1Temperature sensor shorted (R=825 ohm by spec).F2-E2Oven temp too highF2-E3Oven temp too highF2-E5CANCEL key drive line open.F2-E6CANCEL key drive line open.F3 E0Oven sensor opened.F3 E1Oven sensor shorted.F3 E2BAKE/BROIL range over temperature.F3 E3CLEAN range over temperature.View all 46 error codes
F3-E0Door is open but latch is locked (door switch indicates open door, latch switch…F3-E1Self-clean latch will not lock/unlock.F3-E2Oven temp too highF3-E3Oven temp too highF3HHumidity sensor failure.F4-E1Meat probe malfunctionF5Door latch or switch system failure (related to latch assembly, motor, door…F5 E0Door and switches do not agree.F5 E1Door latch not operating.F5 E2Latch error during CLEAN.F5-E0Door is open but latch is locked (door switch indicates open door and latch…F5-E1Self-clean latch will not lock.F5-E5Self-clean temperature 550°F (288°C) not reached within 45 minutes.F5-E7Self-clean latch will not unlock.F6MW relay (Relay 4903) failure.F6-E0Switch pulse return line not connected.
Service modes (12)
- Bake Temperature Offset AdjustmentPress BAKE pad for 5 seconds
- Fahrenheit to Celsius ConversionPress the BROIL pad for 5 seconds
- Fault Code DisplayPress and hold OVEN CANCEL key for 5 seconds.
- Last Error Code RecallPress and hold CANCEL/OFF key for 5 seconds
- Manual Diagnostics Mode 1Within 120 seconds of power up, press STOP/CLEAR, STOP/CLEAR, then Start key
- Manual Diagnostics Mode 2After 120 seconds of power up, press STOP/CLEAR, STOP/CLEAR, then Start key
- Oven Temperature Calibration AdjustmentPress and hold BAKE pad for 3 seconds
- Programming Cavity SizeWithin 60 seconds of power up, press the following touchpads in order
- Programming the Cavity Size1. Within 60 seconds of power up, press the following touchpads: OVEN CANCEL, WARM HOLD, BAKE, TEMP…
- Self-Diagnostic / Test Mode["Press and hold the STOP/CLEAR button while opening the door.","While still holding the STOP/CLEAR…
- Self-diagnostic / Touch Panel and PCBA Test Mode["Press and hold the OFF/CANCEL button while opening the door.","While still holding the OFF/CANCEL…
- Temperature Adjustment (Calibration)Press and hold BAKE pad for 5 seconds
Full entry steps, exit procedures, and test sequences are available in Max.
Related Magic Chef cooktop models
75,000+ service documents · 20,000+ error codes · 100+ brands
Get Started$29/month · Cancel anytime · Or $9.95 3-day pass · Plus applicable tax