Magic Chef 11JK-10K

Available documentation

Error codes (13)

Service modes (9)

• ATC Wash Fill Test (Test 2)["Set the Water Temperature Switch to ATC-controlled Warm/Cold","Set the Timer in the Wash cycle…
• Damp Dry Test["Begin with an empty dryer and clean lint screen.","Set Timer to DAMP DRY.","Set Fabric…
• Diagnostic Test Mode["Ensure door is open.","Ensure unit is in Standby.","Alternately press the MORE TIME (∧) and LESS…
• Electronic Oven Control Test["1. Unplug the oven.","2. Remove the cabinet.","3. Discharge the HV capacitor with a 20,000 ohm…
• Factory Test["Open the dryer door.","Set Fabric Care/Temperature switch to AIR FLUFF.","Set Signal switch to…
• Non-ATC Wash Fill Test (Test 1)["Set the Timer for the Wash cycle","Start the washer and the tub will begin filling with…
• Self-Diagnostic / Touch Panel and PCBA Test["Press and hold the STOP/CLEAR button while opening the door.","While still holding the STOP/CLEAR…
• Self-diagnostic test mode["1
• Touch Panel and PCBA Self-Diagnostic Test Mode["Plug in microwave oven or reconnect power.","Press CANCEL button to reach standby (colon ':'…

Full entry steps, exit procedures, and test sequences are available in Max.