Model reference
Magic Chef BT16KK-4T
Range
15 documents56 error codes36 service modes
Available documentation
Tech Sheet
- Tech Sheet - 160270748 pg
- Electric Freestanding Range Technical Information8 pg
- Tech Sheet - 1602345710 pg
- tech sheet 160233566 pg
- Tech Sheet - 1602731011 pg
- Electric Freestanding Range—Technical Information12 pg
- Tech Sheet - W10321013 - Rev A8 pg
- Tech Sheet - W103844588 pg
- Electric Freestanding Range ⎯ Technical Information6 pg
- Tech Sheet - W10249695 - Rev A8 pg
- Electric Freestanding Range—Technical Information11 pg
- Tech Sheet8 pg
- Tech Sheet36 pg
Service Manual
- Slide-in Electric Range62 pg
Tech Tip
- Instruction Sheet10 pg
MyPros+ Max
Diagnose your Magic Chef BT16KK-4T.
- Step-by-step diagnostics from the service manual
- Test values, resistance specs, and wiring references
- Verified part numbers when replacement is needed
Start diagnosing
$29/month · Cancel anytime · Or $9.95 3-day pass
Error codes (56)
CodeMeaning
1c1cShorted key detected; a key is stuck or shorted on the control board.1c2cKeyboard tail disconnected1c31Cancel key circuit problem; cancel key returning improper value.1c32Cancel key circuit problem1c4cMicro communication failure; serial communications checksum invalid.1c5cVcc or ground fault at testpoint on the control circuit board.1c6cEEPROM error detected on the control board.1c7cControl not calibrated; calibration value out of range.1c81Cook profile corrupted in EEPROM1c82Cook profile corrupted in EEPROM1c8cCooking program error detected during active cook cycle.1d11Runaway oven temperature detected (650°F); sensor resistance greater than 2218…1d12Runaway temperature (650°F) with door unlocked1d21Runaway oven temperature (950°F) detected with door locked; sensor resistance…1d22Runaway temperature (950°F) with door locked3d11Temperature sensor open circuit; sensor resistance reads infinite Ohms.3d12Temperature sensor failure (open)3d21Temperature sensor shorted; sensor resistance reads 0 Ohms.3d22Temperature sensor failure (short)3d41Meat probe shorted3d51Meat probe not calibrated4d11Door position switch not closed when door is locked during clean cycle.4d12Door switch position failure4d21No Reverse Airflow Fan rotation (no/low RPM).4d22No Reverse Airflow Fan rotation (no/low RPM).4d31Reverse Airflow Fan state error (on when supposed to be off).4d32Reverse Airflow Fan state error (on when supposed to be off).4d41High Reverse Airflow Fan rotation (high RPM).4d42High Reverse Airflow Fan rotation (high RPM).4d51Door switch circuit failure; door switch reading neither open nor closed.View all 56 error codes
4d52Door switch circuit failure9d11Latch will not lock; lock switch not closed when clean is activated.9d12Latch will not lock9d21Latch will not unlock; lock switch reads closed when clean is not activated.9d22Latch will not unlock9d31Unlock state unknown; both locked and unlocked switches indicate active…9d32Latch both locked and unlocked9d41Unlock state unknown; neither locked nor unlocked switch indicates active.9d42Latch state unknownF1Internal board failure / A/D Error(s).F1E0Internal board failure / A/D error.F1E1Internal board failure / A/D error.F1E2Internal board failure / A/D error.F2Shorted key on the control panel.F2E0Shorted key detected on the control keypad.F3Oven sensor opened, oven sensor shorted, BAKE/BROIL range over temperature, or…F3E0Oven temperature sensor opened (open circuit).F3E1Oven temperature sensor shorted.F3E2Bake/Broil range over temperature condition.F3E3Clean range over temperature condition.F5Door and switches do not agree (Clean mode) or door latch not operating (Clean…F5E0Door and door position switches do not agree during Clean mode.F5E1Door latch not operating during Clean mode.F5E2Door and door position switches do not agree during Clean mode.F9Miswired house or miswired range.F9E0Miswired house or miswired cooker power supply.
Service modes (36)
- 24 Hour Clock TogglePress and hold Upper Cancel and Favorite pads for 3 seconds.
- 24-hour Clock TogglePress and hold Cancel and Delay pads for 3 to 5 seconds. Press More + or Less
- Beeper Volume AdjustmentPress and hold Upper Cancel and Delay pads for 3 seconds.
- Child Lock OutPress and hold Upper Cancel and Cook & Hold pads for 3 seconds.
- Child LockoutPress and hold Cancel and Cook & Hold pads for 3 to 5 seconds until beep sounds.
- Clock Display TogglePress and hold Cancel and Clock pads for 3 to 5 seconds.
- Control LockoutPress the Back and Setup pads simultaneously for 5 seconds to lock.
- Control ResetPress and hold the Back and Enter pads for 5 seconds to enter SERVICE menu options
- Demo ModePress the Setup pad, then press the right ATM pad until DEMO displays
- Diagnostic Code DisplayPress and hold the More + pad within 5 minutes of powering up the unit. Cycle through the stored…
- Diagnostic Code Display Mode["Within 60 seconds of powering up the control, press and hold the More + pad for 3 to 5…
- Diagnostics ModePress CANCEL > CANCEL > START within a 5-second period.
- Diagnostics Mode (3-digit LCC 90 and LCC 95 Control Display)Press CANCEL 2 times and then START within a 5-second period.
- Diagnostics Test Mode (All LCC Controls)Press CANCEL 2 times and then START within a 5-second period. Then use individual key presses to…
- Diagnostics Test Mode (Relay Checks)After entering Diagnostics Mode (CANCEL>CANCEL>START), press individual keys to test relays
- Display TestPress and hold the Back and Enter pads for 5 seconds to enter SERVICE menu options
- Factory Default ResetPress and hold Cancel and Keep Warm pads for 3 to 5 seconds until beep sounds.
- Faults AccessPress and hold the Back and Enter pads for 5 seconds to enter SERVICE menu options
- Keypad Lockout["Press and hold Cancel and Timer pads for 3 to 5 seconds.","Press More + or Less
- Lower Oven Temperature Adjustment["Press Lower Bake pad.","Enter 550 on the digit-pad.","Immediately press and hold Lower Bake pad…
- One-Watt Standby Mode["Press and hold Cancel and Less
- Oven Temperature Adjustment["Press Bake pad.","Enter 550 on the digit-pad.","Immediately press and hold Bake pad for 3 to 5…
- Oven Temperature Adjustment (Lower Oven)1
- Oven Temperature Adjustment (Upper Oven)1
- Quick Test1
- Quick Test Mode1
- Quick Test Mode (Non-Self Clean Control)["Must be entered within 5 minutes of power-up.","Press and hold Cancel and Broil pads…
- Sabbath Mode["Initiate desired bake function before entering Sabbath mode.","Hold Clock pad for 3 to 5 seconds…
- Service ModePress the Setup pad, then press the right ATM pad until SERVICE displays
- Software Versions AccessPress and hold the Back and Enter pads for 5 seconds to enter SERVICE menu options
- Temperature Adjustment1
- Temperature Adjustment (All LCC Controls)Step 1
- Temperature Display (°F/°C toggle)["Press and hold Cancel and Bake pads for 3 to 5 seconds.","Press More + or Less
- Temperature Display Toggle (°F/°C)["Press and hold UPPER CANCEL and UPPER BAKE pads for 3 seconds."]
- Temperature Display Toggle (F/C)Press and hold Cancel and Bake pads for 3 to 5 seconds. Press More + or Less
- Upper Oven Temperature Adjustment["Press Upper Bake pad.","Enter 550 on the digit-pad.","Immediately press and hold Upper Bake pad…
Full entry steps, exit procedures, and test sequences are available in Max.
Related Magic Chef range models
75,000+ service documents · 20,000+ error codes · 100+ brands
Get Started$29/month · Cancel anytime · Or $9.95 3-day pass