Model reference

Maytag MDG9700AWM

Name: Maytag MDG9700AWM
Brand: Maytag

Dryer

22 documents13 error codes10 service modes

Available documentation

Technical Bulletin - Service Information1 pg
Covers this model
Technical Bulletin - TDL-0085-B Long Dry Times1 pg
Covers this model
Technical Bulletin - TDL-0085-B-French Long Dry Times1 pg
Covers this model
Technical Bulletin - IDL-0002A-B Units Delivered in Sales Mode1 pg
Covers this model
Technical Bulletin - TDL-0085-B Long Dry Times1 pg
Covers this model
Technical Bulletin - Long Dry Times1 pg
Covers this model
Bulletin technique - TDL-0085-B-French Long Dry Times1 pg
Covers this model
Technical Bulletin - IDL-0002A-B-French Units Delivered in Sales Mode1 pg
Covers this model
Technical Bulletin1 pg
Covers this model
Technical Bulletin - TDL-0120-S-French Changed location of thermal fuse and wiring of lamp socket1 pg
Covers this model
Technical Bulletin - TDL-0120-S Changed location of thermal fuse and wiring of lamp socket1 pg
Covers this model
Technical Bulletin - Drum belt rubs on idler bracket1 pg
Covers this model
Technical Bulletin - TDL-0120-S-French Changed location of thermal fuse and wiring of lamp socket1 pg
Covers this model
Technical Bulletin - IDL-0003-B-French MAL1800AX Pedestal Installations5 pg
Covers this model
Technical Bulletin - IDL-0003-B MAL1800AX Pedestal Installations5 pg
Covers this model

MyPros+ Max

$29/month · Cancel anytime · Or $9.95 3-day pass

M+

M+ Max·Maytag Dryer

1 on my Maytag MDG9700AWM

M+

Dryer thermistor short sensed — the

From Tech Sheet W17811404, p.16:

1.Access service mode to confirm the active fault code and read stored error history.

2.Disconnect the sensor and measure resistance. Expected: 10 kΩ to 12 kΩ at 77°F (25°C).

3.Check the sensor harness for opens. A reading outside 5 kΩ to 50 kΩ indicates a failed sensor.

Part WP8577274

Temperature thermistor

CodeMeaning

Clear Diagnostic Codes1
Diagnostic Code AccessEnter Service Mode, then press Wrinkle Prevent
Diagnostic Code Display1
Diagnostic Codes["Enter Service Mode first.","Press Wrinkle Prevent key.","A \"d\" will be displayed.","Rotate the…
Display Diagnostic Codes1. Enter Service Mode. 2. Press Wrinkle Prevent key
Display Software Revision Number1
LED/Switch Check1
LED/Switch VerificationWhile in Service Mode, press and hold the Chime and Wrinkle Prevent keys for 3 seconds.
Service Mode1
System Check Mode1

Full entry steps, exit procedures, and test sequences are available in Max.

78,000+ service manuals · 160,000+ error codes · 55+ brands

$29/month · Cancel anytime · Or $9.95 3-day pass