Model reference
Maytag MER5551BA
Range
5 documents18 error codes13 service modes
Available documentation
Service Manual
- Service Manual - 30" Freestanding Electric Ranges55 pg
- Maytag Amana 30 Inch Freestanding Electric Range Service Manual55 pg
- Service Manual - 1602678455 pg
- Service - Electric Range Service Manual55 pg
Other
- TDC 0096 B2 pg
MyPros+ Max
Diagnose your Maytag MER5551BA.
- Step-by-step diagnostics from the service manual
- Test values, resistance specs, and wiring references
- Verified part numbers when replacement is needed
Start diagnosing
$29/month · Cancel anytime · Or $9.95 3-day pass
Error codes (18)
CodeMeaning
1c1cShorted key detected on the control circuit board.1c31Cancel key circuit problem (improper value).1c4cMicro communication failure (checksum invalid).1c5cVcc or ground fault (Vcc/Gnd at test point).1c6cEEPROM error (no response from EEPROM).1c7cControl not calibrated (calibration value out of range).1c8cCooking program error (CRC invalid).1d11Runaway temperature (650°F) with door unlocked; sensor resistance > 2293 Ohms.1d21Runaway temperature (950°F) with door locked; sensor resistance > 2662 Ohms.3d11Oven temperature sensor open (resistance > infinite Ohms).3d21Oven temperature sensor shorted (resistance > 0 Ohms).4d11Door position switch not closed when door locked.4d51Door switch circuit failure9d11Latch will not lock (lock switch not closed when Clean activated).9d21Latch will not unlock (lock switch closed when Clean not activated).9d31Unlock state unknown9d41Unlock state unknown9d51Lock switch not locked or unlocked.Service modes (13)
- 12-Hour Auto ShutoffControl automatically cancels cooking operations and removes relay drives 12 hours after the last…
- 24-hour Clock Toggle["Press and hold Cancel and Delay pads for 3 to 5 seconds.","Press More+ or Less- pads to toggle…
- Child Lockout["Press and hold Cancel and Cook & Hold pads for 3 to 5 seconds until beep sounds."]
- Clock Display Toggle["Press and hold Cancel and Clock pads for 3 to 5 seconds."]
- Diagnostic Code Display["Must be accessed within 30 seconds of powering up the control.","Press and hold the More+ pad…
- Diagnostic Code Display Mode["Must be accessed within 30 seconds of powering up the control.","Press and hold More+ pad within…
- Factory Default Reset["Press and hold Cancel and Keep Warm pads for 3 to 5 seconds until beep sounds."]
- Oven Temperature Adjustment["Press Bake pad.","Enter 550 on the digit-pad.","Immediately press and hold Bake pad for 3 to 5…
- Quick Test Mode["Must be entered within the first 5 minutes after power up.","Press and hold Cancel and Broil pads…
- Sabbath Mode["Initiate desired bake function before entering Sabbath mode.","Hold Clock pad for 3 to 5 seconds…
- Temperature Display (°F/°C toggle)["Press and hold Cancel and Bake pads for 3 to 5 seconds.","Press More+ or Less- pads to change…
- Temperature Display Format (°F/°C)["Press and hold CANCEL and Delay pads for three seconds.","Press More+ or Less- pad to select °F…
- Temperature Display Toggle (F/C)Press and hold Cancel and Bake pads for 3 to 5 seconds
Full entry steps, exit procedures, and test sequences are available in Max.
Related Maytag range models
78,000+ service manuals · 160,000+ error codes · 55+ brands
Get Started$29/month · Cancel anytime · Or $9.95 3-day pass