mypros+
Model reference

Maytag MGR8700DE2

Range

5 documents15 error codes5 service modes

Available documentation

Tech Sheet

  • Tech Sheet - W10538796 - Rev A (FR)8 pg
    Covers this model
  • Tech Sheet W10538795 Rev A8 pg
    Covers this model

Service Flash

  • Whirlpool Range Service Pointer W10702913A Revised6 pg
    Covers this model
  • Service Pointer - W10702913 - Rev A (Bake Burner May Not Ignite)6 pg
    Covers this model

Installation Guide

  • Installation Instructions40 pg
    Covers this model
MyPros+ Max

Diagnose your Maytag MGR8700DE2.

  • Step-by-step diagnostics from the service manual
  • Test values, resistance specs, and wiring references
  • Verified part numbers when replacement is needed
Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass

Error codes (15)

CodeMeaning
F1Internal circuit board failure or A/D error(s) (displayed as F1E0, F1E1, F1E2…F1E0Internal board failure (LCC 180/190 control).F1E1Internal board failure / A/D error (LCC 180/190 control).F1E2Internal board failure / A/D error (LCC 180/190 control).F2Shorted key (keypad short circuit) (displayed as F2E0 on LCC 180/190 displays).F2E0Shorted key detected (LCC 180/190 control).F3Oven sensor open circuit (displayed as F3E0 on LCC 180/190)F3E0Oven sensor opened (LCC 180/190 control).F3E1Oven sensor shorted (LCC 180/190 control).F3E2BAKE/BROIL range over temperature condition.F3E3CLEAN range over temperature condition.F5Door and latch switch mismatch during clean mode (displayed as F5E0, F5E2 on…F5E0Door and door position switches do not agree (Clean mode) (LCC 180/190 control).F5E1Door latch not operating (Clean mode) (LCC 180/190 control).F5E2Door and door position switches do not agree (Clean mode) (LCC 180/190 control).

Service modes (5)

  • Diagnostic ModePress CANCEL > CANCEL > START within 5 seconds.
  • Diagnostic Test Mode (Relay Tests)From within Diagnostic Mode, the initial display shows 'tSt' (LCC 90/95) or 'tESt' (LCC 180/190)…
  • Diagnostics ModePress CANCEL > CANCEL > START within a 5-second period.
  • Diagnostics Test Mode (Relay Checks)While in Diagnostics Mode (entered via CANCEL>CANCEL>START), press individual keys to test relays
  • Temperature AdjustmentStep 1

Full entry steps, exit procedures, and test sequences are available in Max.

Related Maytag range models

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass