Model reference

Maytag MGRM752BDQ

Name: Maytag MGRM752BDQ
Brand: Maytag

Range

10 documents18 error codes27 service modes

Available documentation

Tech Sheet

Tech Sheet - 1602668312 pg
Covers this model

Service Manual

Maytag Amana 30 Inch Freestanding Gas Range Service Manual69 pg
Covers this model
Service Manual - 1602678569 pg
Covers this model
Service Manual - 30" Freestanding Gas Ranges69 pg
Covers this model

Bulletin

Installation Bulletin - IDC-011-B Gas Conversion1 pg
Covers this model
Installation Bulletin - IDC-0011-B-French Gas Conversion1 pg
Covers this model
Technical Bulletin - TDC-0086-B-French Clock fails or fades out when using bake or broil function1 pg
Covers this model
Technical Bulletin - TDC-0096-B-French Oven Door Handles Breaking2 pg
Covers this model

Service Flash

Technical Bulletin - TDC-0096-B Oven Door Handles Breaking_TDC-0096-B2 pg
Covers this model

Other

TDC 0096 B2 pg
Covers this model

MyPros+ Max

Diagnose your Maytag MGRM752BDQ.

Step-by-step diagnostics from the service manual
Test values, resistance specs, and wiring references
Verified part numbers when replacement is needed

Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass

M+

M+ Max·Maytag Range

1c1c on my Maytag MGRM752BDQ

M+

Shorted key detected on the control

From Tech Sheet W18894358, p.50:

1.Access service mode to confirm the active fault code and read stored error history.

2.Measure control board supply voltage at test points. Expected: 12 VDC and 5 VDC.

3.Inspect all connectors on the main control for corrosion or backed-out pins.

Part WPW10804018

Electronic control board

Error codes (18)

CodeMeaning

1c1cShorted key detected on the control circuit board.1c31Cancel key circuit problem 1c4cMicro communication failure 1c5cVcc or ground voltage error at test point on control board.1c6cEEPROM error 1c7cControl not calibrated 1c8cCooking program error 1d11Runaway oven temperature (650°F) detected with door unlocked (M1) or always…1d21Runaway oven temperature (950°F) detected with door locked (M1 only).3d11Oven temperature sensor open 3d21Oven temperature sensor shorted 4d11Door position switch not closed when door is locked (M1 only).4d51Door switch circuit failure 9d11Door latch will not lock when it should be locked (M1 only).9d21Door latch will not unlock when it should be unlocked (M1 only).9d31Unlock state unknown 9d41Unlock state unknown 9d51Lock switch not locked or unlocked

Service modes (27)

24-Hour Clock TogglePress and hold CANCEL and DELAY pads for 3 to 5 seconds
Child LockoutPress and hold CANCEL and COOK & HOLD pads for 3 to 5 seconds until beep sounds.
Clock Display TogglePress and hold CANCEL and CLOCK pads for 3 to 5 seconds.
Diagnostic Code DisplayPress and hold the MORE+ pad within 30 seconds of powering up the unit
Factory Default ResetPress and hold CANCEL and KEEP WARM pads for 3 to 5 seconds.
M1 12/24 Hour Clock TogglePress and hold CANCEL and DELAY pads for 3 to 5 seconds
M1 Child LockoutPress and hold CANCEL and COOK & HOLD pads for 3 to 5 seconds until beep sounds.
M1 Clock Display Toggle On/OffPress and hold CANCEL and CLOCK pads for 3 to 5 seconds.
M1 Diagnostic Code DisplayWithin 30 seconds of powering up the unit, press and hold More+ pad
M1 Diagnostic Code Display Mode1
M1 Factory Default ResetPress and hold CANCEL and KEEP WARM pads for 3 to 5 seconds.
M1 Oven Temperature Adjustment1
M1 Quick Test Mode1. Within 5 minutes of power-up, press and hold Cancel and Broil pads for 3 to 5 seconds. 2. Once…
M1 Sabbath ModeHold CLOCK pad for 3 to 5 seconds to activate
M1 Temperature Display Toggle (°F/°C)Press and hold CANCEL and BAKE pads for 3 to 5 seconds
NSC Diagnostic Code DisplayWithin 30 seconds of powering up the control, press and hold More+ pad for 3 to 5 seconds
NSC Diagnostic Code Display Mode1
NSC Keypad LockoutPress and hold Cancel and Timer pads for 3 to 5 seconds
NSC One-Watt Standby ModePress and hold Cancel and Less- pads for 3 to 5 seconds.
NSC Oven Temperature Adjustment1
NSC Quick Test Mode1. Within 5 minutes of power-up, press and hold Cancel and Broil pads for 3 to 5 seconds. 2. Once…
NSC Sabbath ModeHold Clock pad for 3 to 5 seconds to activate
NSC Temperature Display Toggle (°F/°C)Press and hold Cancel and Bake pads for 3 to 5 seconds
Oven Temperature Adjustment1
Quick Test1. Within 5 minutes of power-up, press and hold Cancel and Broil pads simultaneously for 3 to 5…
Sabbath ModeHold CLOCK pad for 3 to 5 seconds to activate Sabbath mode
Temperature Display Toggle (°F/°C)Press and hold CANCEL and BAKE pads for 3 to 5 seconds

Full entry steps, exit procedures, and test sequences are available in Max.

Related Maytag range models

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass