Model reference
Maytag SCE70600
Range
2 documents12 error codes16 service modes
Available documentation
Service Manual
- Electric Slide-In Service Manual114 pg
Other
- Jennair Range Service Documentation114 pg
MyPros+ Max
Diagnose your Maytag SCE70600.
- Step-by-step diagnostics from the service manual
- Test values, resistance specs, and wiring references
- Verified part numbers when replacement is needed
Start diagnosing
$29/month · Cancel anytime · Or $9.95 3-day pass
Error codes (12)
CodeMeaning
F-Communication error between boards (display board side).F1Power to element relay energized during time of day display.F2Over temperature sensed; over 620°F sensed by control in time of day mode or…F3Cooling fan on with no oven function selected (open oven sensor).F4Shorted oven sensor.F5Power to element relays disabled in cook mode.F7ESC faultF8Shorted meat probe alarm.F9Door lock safety circuit on power relay board.FCCommunication error between boards (power relay board side).FFInvalid temperature reading on power relay board.FRSecond oven error sensed (double oven only).Service modes (16)
- Clock and Temperature Format Change["Hold either Timer key down on power up.","Two left digits display clock format, right digit…
- ESC Child Lockout["Press and hold both the UP and MED keys for 5 seconds.","After 5 seconds, OFF will be displayed…
- Temperature Offset Change["Program bake above 500°F.","Re-press the Bake pad and hold for 3-4 seconds (must be re-pushed…
- Test Mode - Bake Key["Enter test mode, then press and hold the Bake key."]
- Test Mode - Broil Key["Enter test mode, then press and hold the Broil key."]
- Test Mode - Clean Key (Door Lock Switch Status)["Enter test mode, then press the Clean key."]
- Test Mode - Clock Key["Enter test mode, then press the Clock key."]
- Test Mode - Convect Bake Key["Enter test mode, then press and hold the Convect Bake key."]
- Test Mode - Convect Roast Key["Enter test mode, then press and hold the Convect Roast key."]
- Test Mode - Cook Time Key (Stored Fault Codes)["Enter test mode, then press the Cook Time key."]
- Test Mode - Fan Key["Enter test mode, then press Fan key
- Test Mode - Oven Light Key["Enter test mode, then press and hold the Oven Light key."]
- Test Mode - Probe Key["Enter test mode, then press the Probe key."]
- Test Mode - Stop Time Key["Enter test mode, then press and hold the Stop Time key."]
- Test Mode - Timer Keys["Enter test mode, then press the Timer keys."]
- Test Mode (Fast Test)["Hold the Stop Time key down at power up, OR hold the Stop Time key down for 10 seconds within 5…
Full entry steps, exit procedures, and test sequences are available in Max.
Related Maytag range models
78,000+ service manuals · 160,000+ error codes · 55+ brands
Get Started$29/month · Cancel anytime · Or $9.95 3-day pass