Model reference
Maytag FAV6800AWW
Washer, Dryer
17 error codes30 service modes
MyPros+ Max
Diagnose your Maytag FAV6800AWW.
- Step-by-step diagnostics from the service manual
- Test values, resistance specs, and wiring references
- Verified part numbers when replacement is needed
Start diagnosing
$29/month · Cancel anytime · Or $9.95 3-day pass · Plus applicable tax
Error codes (17)
CodeMeaning
CLLid is closed.dcThe load is unbalanced, preventing high speed spin.FLThe machine has repeatedly tried to lock the lid.LEWater level sensor faultLLLarge Load Detected.LOLid has failed to unlockLrLocked RotorndNo DrainnFNo fillodThe lid was not opened after the last three completed cycles.oLMachine PausedOPLid is Open.PFPower failureSdMachine has detected high level of sudsUBUnbalance or cabinet hit detected during final spin, which prevented the…UCContinuous Unbalanced CircuitULLatch UnlockedService modes (30)
- Board Input TestWhile in Service Mode, press the Super Wash key
- Board Input Test (FAV6800A)While in Service Mode, press the Super Wash key.
- Board Output TestWhile in Service Mode, press the Delicates key. Display shows 'ot'. Press
- Board Output Test (FAV6800A)While in Service Mode, press the Delicates key.
- Clear All Diagnostic CodesWhile diagnostic code is displayed in Service Mode, press Quick Wash + Whites together.
- Cycle Count DisplayWhile in Service Mode
- Diagnostic Code DisplayWhile in Service Mode, press the Wrinkle Control key
- Display Diagnostic Codes (FAV6800A)While in Service Mode, press the Wrinkle Control key
- Display Diagnostic Codes (FAV9800A)Enter Service Mode to display diagnostic codes
- Display Software VersionWhile in Service Mode, press Bulky Items 3 times
- Fast Time Down / Advance to Next StepWhile any test or cycle is running in Service Mode, press the Quick Wash key to advance the program…
- Hold Quick Service Cycle StepPress Signal up and Signal down together to hold at current step.
- Membrane Pad TestWhile in Service Mode, press the Presoak key
- Membrane Pad Test (FAV6800A)While in Service Mode, press the Presoak key, then press individual buttons to test.
- Motor Control Board Output Test1) Disconnect power to washer, 2) Remove front panel and disconnect JP4 connector from Motor…
- Motor Control Board Output Test (FAV6800A)1) Disconnect power
- Quick Service CycleWhile in Service Mode, press the Wash/Rinse Temp key. Display shows 'sc'. Steps
- Quick Service Cycle (FAV6800A)While in Service Mode, press the Wash/Rinse Temp up key.
- Quick Spin TestWhile in Service Mode, press the Hand Wash key to start a Quick Spin Test. Steps
- Quick Spin Test (FAV6800A)While in Service Mode, press the Hand Wash key.
- Quick Spin Test (FAV9800A)While in Service Mode, select the Quick Spin Test option.
- Service Cycle (FAV9800A)While in Service Mode, select the Service Cycle option.
- Service ModePress the Enviro Plus and Spin Only keys simultaneously for three seconds or until the control beeps
- Service Mode (FAV6800A)Press and hold the Enviro Plus and Spin Only keys for three seconds or until the control beeps.
- Service Mode (FAV9800A)Press and hold the Help and Back keys for three seconds or until the control beeps.
- System Check (FAV9800A)While in Service Mode, select System Check on the display
- Tub Displacement Sensor Diagnostic Test1) Enter Service Mode (Enviro Plus + Spin Only for 3 seconds), 2) Press Super Wash key, 3) Press…
- Tub Displacement Sensor Diagnostics (FAV6800A)1) Enter Service Mode (Enviro Plus + Spin Only for 3 sec). 2) Press Super Wash key. 3) Press…
- Tub Displacement Sensor Diagnostics (FAV9800A)1) Enter Service Mode (Help + Back for 3 sec). 2) Press System Check on display. 3) Push tub to…
- User Interface Test (FAV9800A)Enter User Interface test from Service Mode and follow the directions on screen.
Full entry steps, exit procedures, and test sequences are available in Max.
Related Maytag washer, dryer models
75,000+ service documents · 20,000+ error codes · 100+ brands
Get Started$29/month · Cancel anytime · Or $9.95 3-day pass · Plus applicable tax