mypros+
Model reference

Thermador POD301

Oven

5 documents34 error codes7 service modes

Available documentation

Service Manual

  • USE AND CARE MANUAL - Built-in Ovens48 pg
    Covers this model
  • SERVICE MANUAL for Thermador Professional Series Built-in Wall Ovens21 pg
    Covers this model
  • ServiceManualThermProBIWO RevA321 pg
    Covers this model
  • SERVICE MANUAL for Thermador Professional Series Built-in Wall Ovens21 pg
    Covers this model

Training

  • Training Program for Professional & Masterpiece Series Ovens69 pg
    Covers this model
MyPros+ Max

Diagnose your Thermador POD301.

  • Step-by-step diagnostics from the service manual
  • Test values, resistance specs, and wiring references
  • Verified part numbers when replacement is needed
Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass

Error codes (34)

CodeMeaning
EFault code displayed as 'E' followed by a number, indicating a system fault…E000Control module and user interface are mismatched (wrong module combination).E003User interface electronics exceed 185°F/85°C (electronics too hot).E005Loss of communication between user interface and control module.E009ROM check error in user interface (start-up error).E010Data memory error in user interface.E011Continuous pushing of a single key detected.E012Defective user interface PCB temperature sensor.E014ON/OFF key does not work.E032Continuous pushing of multiple keys detected (10 seconds of multiple keys being…E101Cavity 1 temperature sensor open.E104Cavity 1 temperature sensor shorted.E106Cavity 1 door latch does not lock.E107Cavity 1 door latch does not unlock.E115Cavity 1 temperature in unlocked cavity too high.E116Cavity 1 meat probe error; standard probe module is part of the control module.E118Cavity 1 cooling fan supervision error (cooling fan speed is too low or too…E122Cavity 1 probe sensor temperature too high.E123Cavity 1 probe sensor temperature too low.E124Cavity 1 door switch error (door switch is in undefined state).E126Cavity 1 door latch error (door latch is in an undefined state).E201Cavity 2 temperature sensor open.E204Cavity 2 temperature sensor shorted.E206Cavity 2 door latch does not lock.E207Cavity 2 door latch does not unlock.E215Cavity 2 temperature in unlocked cavity too high.E218Cavity 2 cooling fan supervision error (cooling fan speed is too low or too…E224Cavity 2 door switch error (door switch is in undefined state).E226Cavity 2 door latch error (door latch is in an undefined state).E303Control module electronics exceed 212°F/100°C (electronics too hot).
View all 34 error codes
E309ROM check error in control module.E310Data memory error in control module.E312Defective control module PCB temperature sensor.ErrInvalid cooking mode and temperature combination has been set; the oven will…

Service modes (7)

  • Demo Mode["The display and lights will work on 120VAC when the black and red wires are tied together."]
  • Sabbath Mode["Turn the heating mode dial to 'BAKE'.","Set the temperature (100°F
  • Self-Clean["Turn the heating mode dial to 'CLEAN'.","Turn the temperature dial to 'CLEAN'.","Set the cleaning…
  • Service Mode["Set oven mode knob(s) to OFF.","Set upper oven temperature knob to 100°.","Press SELECT, up…
  • Temperature Offset Adjustment (Cavity 1)["Simultaneously press FAST PREHEAT and ▲ for 5 seconds.","Confirm that Upper is correctly…
  • Temperature Offset Adjustment (Cavity 2)["Simultaneously press FAST PREHEAT and ▼ for 5 seconds.","Confirm that Lower is correctly…
  • Temperature Offset Calibration["Ensure the oven is turned off.","Single oven

Full entry steps, exit procedures, and test sequences are available in Max.

Related Thermador oven models

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass