mypros+
Model reference

U-Line CLR1215

Ice Maker

4 documents14 error codes14 service modes

Available documentation

Service Manual

  • USER GUIDE - 1000 Series • CLR1215 • 15" Clear Ice Maker60 pg
    Covers this model
  • User Guide & Service Manual57 pg
    Covers this model
  • User Guide & Service Manual53 pg
    Covers this model

Quick Reference

  • QUICK START GUIDE - 1000 Series CLR121516 pg
    Covers this model
MyPros+ Max

Diagnose your U-Line CLR1215.

  • Step-by-step diagnostics from the service manual
  • Test values, resistance specs, and wiring references
  • Verified part numbers when replacement is needed
Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass

Error codes (14)

CodeMeaning
10EError displayed on unit; typically related to door seal issue.E0Door 1 (upper) open for longer than 5 minutes.E1Thermistor 1 (Bin) open circuit.E2Thermistor 2 (Condenser/Liquid Line) open circuit.E3Thermistor 3 open circuit (does not apply to CLR1215 model).E4Thermistor 4 open circuit (does not apply to this model).E5Thermistor 1 (Bin) shorted.E6Thermistor 2 (Condenser/Liquid Line) shorted.E7Thermistor 3 shorted (does not apply to CLR1215 model).E8Thermistor 4 shorted (does not apply to this model).E9Door 2 (lower) open error.ERError displayed on unit; typically related to door seal issue.P1Pump circuit open (does not apply to CLR1215 model).PiPump circuit open.

Service modes (14)

  • Clean Cycle ModePress and hold the Clean button for 5 seconds
  • Clean ModeTurn unit on by pressing POWER
  • Component Testing (Service Mode Option 19)Enter Service Mode (hold hidden button 10 seconds), scroll to option 19 using up/down arrows, press…
  • Factory Test Mode (Service Menu #29)Enter Service Mode, scroll to option 29.
  • Ice Thickness Adjust ModePress and hold the Up arrow for 5 seconds
  • Ice Thickness Adjustment ModePress and hold the DOWN button for 5 seconds
  • Model Number Programming1
  • Model Number Programming Mode1
  • Sabbath ModePress and hold the POWER button until the unit turns off.
  • Service ModeHold the hidden button (button 1, far left with no LED above it) for 10 seconds
  • Showroom ModeHold the LIGHT key and the POWER key simultaneously for 5 seconds
  • Silent ModeHold the UP and DOWN buttons for 3 seconds
  • Silent Mode (3-hour ice production suspension)Hold the UP and DOWN buttons for 3 seconds
  • Silent Mode (ice production suspended for 3 hours)Hold the down arrow and press the up arrow three times

Full entry steps, exit procedures, and test sequences are available in Max.

Related U-Line ice maker models

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass