mypros+
Model reference

U-Line CLRCO2175B-40

Ice Maker

2 documents12 error codes21 service modes

Available documentation

Service Manual

  • Under the Counter Ice Maker Service Manual47 pg
    Covers this model
  • Under the Counter Ice Maker Service Manual47 pg
    Covers this model
MyPros+ Max

Diagnose your U-Line CLRCO2175B-40.

  • Step-by-step diagnostics from the service manual
  • Test values, resistance specs, and wiring references
  • Verified part numbers when replacement is needed
Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass · Plus applicable tax

Error codes (12)

CodeMeaning
E1Thermistor 1 is open.E10Door #2 (drawer) open longer than 20 minutes.E11EE Memory error.E2Thermistor 1 is shorted.E3Main door or bottom drawer is open longer than 20 minutes.E4Compressor has 100% runtime between two defrost cycles. Does not show on displayE5Thermistor 1 out of range +10°F for more than 12 hours (actual temp over…E6Thermistor 1 out of range -10°F for more than 12 hours (actual temp under…E7Thermistor 2 open or shorted.E8Thermistor 3 open or shorted.E9Thermistor 4 open or shorted.P1Pump circuit open due to high water level in ice bin, detecting a drain problem.

Service modes (21)

  • Blackout / Sabbath ModeHold the LIGHT key for 10 seconds until the °F starts flashing
  • Blackout / Sabbath Mode (Echelon)Hold the LIGHT key for 10 seconds until the °F starts flashing
  • Blackout / Sabbath Mode (Origins)Hold the LIGHT key for 10 seconds until the °F starts flashing
  • Clean CycleHold the ON/OFF key and press the LIGHT button three times
  • Fahrenheit to Celsius ToggleHold the LIGHT key and press COLDER three times.
  • Force HarvestHold the LIGHT key and press the UP arrow three times
  • Forced DefrostHold the LIGHT key and press ON/OFF three times
  • Ice Thickness AdjustHold the UP arrow and press the DOWN arrow three times
  • Model Number Change (Echelon)1
  • Model Number Change (Origins)1
  • ON/OFFHold the ON/OFF key for approximately 10 seconds until the 'F' begins to flash
  • ON/OFF ModeHold the ON/OFF key for approximately 10 seconds until the 'F' begins to flash
  • Relay StatusHold the DOWN arrow (COLDER) and press ON/OFF three times
  • Service Mode (Echelon - 27 options)Hold the WARMER (UP) key and press the LIGHT button three times
  • Service Mode (Echelon models - 27 options)Hold the WARMER key and press the LIGHT button three times
  • Service Mode (Origins - 16 options)Hold the WARMER key and press the LIGHT button three times
  • Service Mode (Origins models - 16 options)Hold the WARMER key and press the LIGHT button three times
  • Showroom Mode (Echelon)Hold the down arrow and press the LIGHT button three times
  • Showroom Mode (Origins)Hold the COLDER key and press the LIGHT button three times
  • Temporary Shutdown / Office ModeHold the DOWN arrow and press the UP arrow three times
  • View Actual TemperatureHold the WARMER key for approximately five seconds until the 'F' flashes

Full entry steps, exit procedures, and test sequences are available in Max.

Related U-Line ice maker models

75,000+ service documents · 20,000+ error codes · 100+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass · Plus applicable tax