mypros+
Model reference

U-Line 2115WCOL

Refrigerator

5 documents12 error codes33 service modes

Available documentation

Service Manual

  • Use and Care Guide24 pg
    Covers this model
  • Service Manual 2008 Échelon Series and Origins Series176 pg
    Covers this model
  • Service Manual 2008 Échelon Series and Origins Series176 pg
    Covers this model
  • Service Manual 2010180 pg
    Covers this model
  • Entertain with U-Line Elegance Service Manual 2010180 pg
    Covers this model
MyPros+ Max

Diagnose your U-Line 2115WCOL.

  • Step-by-step diagnostics from the service manual
  • Test values, resistance specs, and wiring references
  • Verified part numbers when replacement is needed
Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass · Plus applicable tax

Error codes (12)

CodeMeaning
E1Thermistor 1 is open.E10Top drawer has been left open longer than 20 minutesE11EE Memory error.E2Thermistor 1 is shorted.E3Main door or bottom drawer has been left open longer than 20 minutes.E4Compressor had 100% runtime between two defrost cyclesE5Thermistor 1 out of range +10°F for more than 12 hours.E6Thermistor 1 out of range -10°F for more than 12 hours, indicating the…E7Thermistor 2 open or shortedE8Thermistor 3 open or shortedE9Thermistor 4 open or shortedP1Pump circuit is detecting a drain problem, or pump circuit open due to high…

Service modes (33)

  • Blackout/Sabbath ModeTouch and hold the LIGHT icon for ten seconds and release (the °F symbol will flash briefly at the…
  • Display Off ModeTouch and hold the WARMER icon, and within five seconds press the POWER icon three times.
  • Échelon Automatic Relay Toggle (Service Option 22)["Enter Échelon Service Mode.","Scroll to option 22.","Press LIGHT to enter.","Board will cycle…
  • Échelon Blackout ModeHold the LIGHT key for 10 seconds until the °F starts flashing
  • Échelon Clean CycleHold the ON/OFF key and press the LIGHT key three times
  • Échelon Display TogglePress the up arrow and touch the ON/OFF key three times
  • Échelon Display Toggle (Glass door models only)["Press the up arrow (WARMER) key.","Touch the ON/OFF key three times.","The °F sign will flash and…
  • Échelon Fahrenheit to Celsius ToggleHold the LIGHT key and press the down arrow three times.
  • Échelon Fahrenheit/Celsius Toggle["Hold the LIGHT key.","Press the down arrow (COLDER) three times.","Control will beep once and…
  • Échelon Forced DefrostHold the LIGHT key and press the ON/OFF key three times
  • Échelon Forced HarvestHold the LIGHT key and press the up arrow three times.
  • Échelon Ice Maker Off ModeHold the ON/OFF key and press the up arrow three times
  • Échelon Ice Thickness AdjustHold the up arrow and press the down arrow three times
  • Échelon Model Number Change1
  • Échelon Relay Status CheckHold the COLDER key and press the ON/OFF key three times
  • Échelon Service ModeHold the WARMER key and press the LIGHT button three times
  • Échelon Showroom ModeHold the COLDER (down arrow) key and press the LIGHT button three times
  • Échelon Temporary Shutdown / Office ModeHold the DOWN ARROW and press the UP ARROW three times
  • Échelon Temporary Shutdown/Office ModeHold the down arrow and press the up arrow three times
  • Échelon View T1 Temperature["Hold the WARMER key for approximately five seconds until the 'F' flashes.","Release and the…
  • Échelon View Thermistor Readings (T2-T4)["Hold both the WARMER and COLDER keys simultaneously for about five seconds.","Display will cycle…
  • Factory Control Mode (flashing symbols)Inadvertently entered; no intentional entry sequence documented.
  • Factory Control Mode (numeric display 0-26 or 99)Inadvertently entered; no intentional entry sequence documented.
  • Fahrenheit to Celsius Toggle (Échelon)Hold the LIGHT key and press the DOWN ARROW three times.
  • Fahrenheit to Celsius Toggle (Origins)Hold the LIGHT key and press COLDER three times.
  • Origins Blackout ModeHold the LIGHT key for 10 seconds until the °F starts flashing
  • Origins Display TogglePress the up arrow (WARMER) and touch the ON/OFF key three times
  • Origins Fahrenheit to Celsius ToggleHold the LIGHT key and press COLDER three times.
  • Origins Model Number Change1
  • Origins Service ModeHold the WARMER key and press the LIGHT button three times
  • Origins Showroom ModeHold the COLDER key and press the LIGHT button three times
  • Temperature Display Fahrenheit/Celsius TogglePress and hold the LIGHT icon and within five seconds press the COOLER icon three times.
  • View Actual Zone TemperaturesPress and hold the WARMER icon for approximately five seconds and release when the °F symbol begins…

Full entry steps, exit procedures, and test sequences are available in Max.

Related U-Line refrigerator models

75,000+ service documents · 20,000+ error codes · 100+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass · Plus applicable tax