mypros+
Model reference

Wascomat EX22FC

Washer

1 document14 error codes4 service modes

Available documentation

Service Manual

  • Operating & Maintenance Manual75 pg
    Covers this model
MyPros+ Max

Diagnose your Wascomat EX22FC.

  • Step-by-step diagnostics from the service manual
  • Test values, resistance specs, and wiring references
  • Verified part numbers when replacement is needed
Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass · Plus applicable tax

Error codes (14)

CodeMeaning
!!!EMERGENCY STOP USED!!!The emergency stop button has been activated.DOOR LOCK ERRORThe door lock is not locking correctly.HIGH TEMPERATUREWater temperature has exceeded safe limits.LOW OIL LEVELThe automatic lubricating oil reservoir for the axle ring is low (applies only…NO HEATThe machine is not heating the water when it should be.NO WATER. CHECK INLET!No water is reaching the machine; manual shut-off valves may be closed or water…OPEN CIRCUIT IN TEMPERATURE SENSORThe temperature sensor circuit is open (broken connection or failed sensor).PHASE ERRORElectrical phase error detected, typically during installation.SWITCH FOR UNBALANCE DETECTION IS ONThe imbalance detection switch is triggered or stuck.TACHO ALWAYS INDICATING HIGH SPEEDThe speed sensor (tachometer) is indicating high speed when the drum is at low…TACHO ALWAYS INDICATING LOW SPEEDThe speed sensor (tachometer) is indicating low speed during extraction.THE DOOR IS OPENThe door is detected as open or the door lock switch is not indicating a closed…WATER IN MACHINEWater is present in the machine at startup when it should not be.WATER LEFTWater cannot be drained within the programmed drain time, possibly due to…

Service modes (4)

  • Built-in service program["Contact service personnel for further information on accessing the built-in service program in…
  • Function check (test program)["Close the door.","Open the manual water and steam valves.","Add detergent and…
  • Program statistics / service info["Select program number 00 using the numeric keys.","Press PROG
  • Programming mode["Turn the key switch from RUN to PROGRAM position."]

Full entry steps, exit procedures, and test sequences are available in Max.

Related Wascomat washer models

75,000+ service documents · 20,000+ error codes · 100+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass · Plus applicable tax