mypros+
Model reference

Whirlpool W10478475

Oven

1 document20 error codes13 service modes

Available documentation

Tech Sheet

  • Tech Sheet - W10478475 - Rev B8 pg
    Covers this model
MyPros+ Max

Diagnose your Whirlpool W10478475.

  • Step-by-step diagnostics from the service manual
  • Test values, resistance specs, and wiring references
  • Verified part numbers when replacement is needed
Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass

Error codes (20)

CodeMeaning
F1E0EEPROM communication error on oven control.F1E0 (cooktop)EEPROM communication error on cooktop (EGO) control.F1E5Oven control sensor out of range.F1E7PCB thermistor open or shorted on oven control.F1E7 (cooktop)PCB thermistor/sensor open or shorted on cooktop control.F1E9WIDE queue full on oven control.F1E9 (cooktop)WIDE queue full on cooktop control.F2E0Keypad disconnected from oven control.F2E1Stuck key detected on oven control keypad.F2E1 (cooktop)Stuck key on cooktop control.F2E2Cancel key error on oven control.F3E0Main oven temperature sensor open or shorted.F3E2Warming drawer temperature sensor open or shorted (on some models).F5E0Oven door position and door switch do not agree.F6E0 (cooktop)Right cooktop communication error.F6E1Over temperature condition during cook cycle.F6E3Over temperature condition in warming drawer.F6E4 (cooktop)Left cooktop communication error.F6E5 (cooktop)Oven control communication error (from cooktop control perspective).F9E0Mis-wired house or range electrical connection.

Service modes (13)

  • Cooktop (EGO) Diagnostics Mode["Ensure both cooktop (EGO) controls are OFF (idle mode)","Touch OFF>OFF>ON for the selected…
  • MRC2 Diagnostics Mode (Auto Test)["Press CANCEL","Press CANCEL","Press START","Display shows 'TEST ON' with cavity temperature and…
  • MRC2 Service Mode - AUTO TEST["Press CANCEL>CANCEL>START to enter Service Mode","Scroll to step 10
  • MRC2 Service Mode - CONTROL RESET["Press CANCEL>CANCEL>START to enter Service Mode","Scroll to step 6
  • MRC2 Service Mode - DISPLAY["Press CANCEL>CANCEL>START to enter Service Mode","Scroll to step 5
  • MRC2 Service Mode - ENG MODE["Press CANCEL>CANCEL>START to enter Service Mode","Scroll to step 2
  • MRC2 Service Mode - EXTERNAL FAULTS["Press CANCEL>CANCEL>START to enter Service Mode","Scroll to step 8
  • MRC2 Service Mode - FAULTS["Press CANCEL>CANCEL>START to enter Service Mode","Scroll to step 7
  • MRC2 Service Mode - RELAY USAGE["Press CANCEL>CANCEL>START to enter Service Mode","Scroll to step 9
  • MRC2 Service Mode - TEST MODE (Relay Checks)["Press CANCEL>CANCEL>START to enter Service Mode","Scroll to step 3
  • MRC2 Service Mode - TEST ON (Relay Checks)["Press CANCEL","Press CANCEL","Press START","Display shows 'TEST ON'
  • MRC2 Service Mode - USAGE["Press CANCEL>CANCEL>START to enter Service Mode","Scroll using up arrow/+ or 3 key to step 1
  • MRC2 Service Mode - VERSION["Press CANCEL>CANCEL>START to enter Service Mode","Scroll to step 4

Full entry steps, exit procedures, and test sequences are available in Max.

Related Whirlpool oven models

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass