Model reference
Wolf SO36UP
Oven
8 documents19 error codes5 service modes
Available documentation
Service Manual
- Technical Service Manual Wall Ovens83 pg
- Technical Service Manual Wall Ovens83 pg
- Service Manual L Series Wall Oven 1 66 pg
- L Series Wall Oven Service Manual75 pg
- Wall Oven L-Series Technical Service Manual (Including Parts List & Exploded Views)140 pg
- Wall Oven Series Technical Service Manual83 pg
- Wolf L Series Wall Oven SO30 DO30 SO36 Service Manual84 pg
Other
- RevC WallOven Svcmanual 4 0584 pg
MyPros+ Max
Diagnose your Wolf SO36UP.
- Step-by-step diagnostics from the service manual
- Test values, resistance specs, and wiring references
- Verified part numbers when replacement is needed
Start diagnosing
$29/month · Cancel anytime · Or $9.95 3-day pass · Plus applicable tax
Error codes (19)
CodeMeaning
CHECKSUMEEPROM checksum is incorrect, checked at power up and when OVEN OFF key is…COMM ERRCommunication lost with the oven controller (reported by oven controller).CONTROL COMCommunication lost with the oven controller (reported by the display).COOL FANCooling fan failure, indicating a failure of the cooling fan or circuit.EEPROMCannot read or write to the EEPROM, indicating an Oven Controller failure.F1Door lock or unlock switches not sensed within 60 seconds while driving the…FUSES WRONGController configuration settings incorrect or code protection is disabled.KEY COMMFailure between the Oven Controller and the Control Panel Assembly (reported by…KEYBOARD ERRORKey communication error reported by display board.LOWER RELAYLower oven shift register feedback has indicated a failure.OVER TEMPOver temperature occurs when the oven reaches a temperature of 630°F for an…PROBE SHORTEDMeat probe sensed as being shorted, occurs if the meat probe is not inserted…RELAY CALRelay phase calibration failed, indicating a timing problem with the relay on…RELAY STUCKPower relay shortedRTD OPENOpen circuit detected on RTD oven temperature sensor.RTD SHORTEDShorted circuit detected on the RTD oven temperature sensor.SENSOR CALAnalog to digital error during calibration phase, indicating an Oven Controller…SPI COM ERRSPI communication lost with main controller reported by the display head…SPI COMMSPI communication lost with main controller reported by the display head…Service modes (5)
- Diagnostic ModeWith the oven OFF, press and hold the TEMPERATURE key and the 0 (ZERO) key simultaneously for 3…
- Diagnostic Mode - Lower Oven (Double Oven)1
- Diagnostic Mode - Single Oven1
- Diagnostic Mode - Upper Oven (Double Oven)1
- Field Option ModeWith the oven OFF, press and hold the TEMPERATURE key for 5 seconds.
Full entry steps, exit procedures, and test sequences are available in Max.
Related Wolf oven models
75,000+ service documents · 20,000+ error codes · 100+ brands
Get Started$29/month · Cancel anytime · Or $9.95 3-day pass · Plus applicable tax