Ariston Washer Error Code F02

F02 indicates that the washer's motor is blocked or that the tachometric sensor circuit has a short circuit or open circuit fault. The tachometric sensor monitors motor speed, and if its signal is missing or abnormal, the control board shuts the machine down. The fault can stem from a physically stuck motor, a failed sensor, damaged wiring, or worn motor brushes.

No, you should not continue running the washer while F02 is active. The machine has detected a motor or sensor fault and has stopped operation to protect internal components. Running it repeatedly through reset cycles without addressing the root cause could result in additional damage to the motor or control board.

Repair costs vary depending on the failed component. Replacing motor brushes is generally the least expensive fix, typically ranging from around $20 to $60 for parts. A tachometric sensor replacement usually falls in the $30 to $80 range for parts. If the motor or control board requires replacement, total repair costs including labor can range from $150 to $400 or more depending on your location and service provider.

Some causes of F02 are DIY-friendly. Checking the drum for blockages by turning it manually costs nothing and requires no tools. Inspecting and replacing motor brushes or a tachometric sensor is within reach for a technically confident homeowner with basic multimeter skills. However, if the fault points to the motor or control board, professional service is recommended.

A reset may temporarily clear the code, but if the underlying fault is still present, F02 will return once the machine attempts to run the motor again. A reset is useful for confirming whether the fault is intermittent or persistent, but it is not a repair. The motor, tachometric sensor, and wiring should be inspected before relying on a reset.