mypros+
Error code reference

Electrolux Range Error Code F015

Keyboard error.

Electrolux codesElectrolux range codes

Keyboard error.

First step from the service manual

Turn range OFF, unplug power cord from wall, wait 30 seconds and reapply power. If problem persists, replace touch panel.

The complete diagnostic procedure includes additional test steps, resistance specifications, wiring diagram references, and component test points.

MyPros+ Max

Get the full diagnostic procedure for F015.

  • Step-by-step tests with expected resistance, voltage, and continuity values
  • Wiring diagram references and connector pinouts from the OEM service manual
  • Verified part numbers when replacement is required
Get the full procedure

$29/month · Cancel anytime · Or $9.95 3-day pass

What F015 means on a Electrolux range

The F015 error code on an Electrolux range indicates a keyboard error, meaning the control board has detected a fault in the touch panel or keypad assembly. The touch panel communicates user inputs to the main control board through a ribbon cable and signal interface. When the control board cannot properly read input signals from the keypad, or receives out-of-range or erratic signals, it triggers F015 to flag the failure and prevent unintended operation.

The most common cause of this error is a failure within the touch panel membrane itself, where individual key contacts deteriorate or short together over time due to heat exposure, moisture intrusion, or normal wear. A damaged or loose ribbon cable connecting the touch panel to the control board can also disrupt communication and produce this code. In some cases, residual voltage or a temporary signal glitch can cause a false F015 trigger, which is why a full power reset is the recommended first diagnostic step.

Diagnosing F015 begins with disconnecting power to the range for at least 30 seconds, then restoring power to clear any transient faults. If the error code returns after the reset, the touch panel is the primary suspect and should be replaced. In less common situations, the main control board itself may be responsible if a new touch panel does not resolve the fault, but board replacement is only warranted after the touch panel has been ruled out.

Source: manufacturer service documentation.

Common causes of F015

  1. 01

    Failed touch panel membrane

    Part replacement

    The touch panel membrane degrades over time from heat, grease, and repeated use, causing keys to short or stop sending proper signals to the control board. This is the most frequent cause of F015 and typically requires touch panel replacement.

  2. 02

    Loose or damaged ribbon cable

    Wiring / connection

    The ribbon cable connecting the touch panel to the main control board can become unseated or develop cracks, interrupting the signal path and triggering a keyboard error. Inspect the cable connection at both ends for damage or improper seating.

  3. 03

    Moisture or debris under the keypad

    Part replacement

    Liquid spills or grease buildup beneath the touch panel surface can cause keys to register false inputs or fail to respond, producing an F015 fault. Cleaning around the panel may help, but moisture damage to the membrane often requires replacement.

  4. 04

    Transient electrical glitch

    Wiring / connection

    A temporary voltage spike or power fluctuation can cause the control board to misread keypad signals and throw a false F015 code. A 30-second power reset clears this condition without any parts replacement.

  5. 05

    Faulty main control board

    Part replacement

    If the touch panel and ribbon cable are confirmed to be in good condition and the error persists after panel replacement, the main control board may be failing to correctly process keypad input signals. Board replacement is a secondary diagnostic step after the touch panel has been ruled out.

See the test procedure for each cause

Frequently asked questions about F015

What does F015 mean on a Electrolux range?
F015 on an Electrolux range indicates a keyboard error, meaning the control board has detected a problem with the touch panel or keypad assembly. The control board is not receiving proper signals from the keypad. This can result from a worn touch panel, a loose ribbon cable, or a temporary electrical glitch. Unplugging the range for 30 seconds is the first step to determine whether the fault is persistent.
Will resetting my Electrolux range clear the F015 error?
A power reset will clear F015 if the error was caused by a temporary voltage glitch or a transient communication fault. Turn the range off, unplug the power cord from the wall, wait at least 30 seconds, and then restore power. If the error code returns after the reset, the underlying hardware issue with the touch panel needs to be addressed and a reset alone will not permanently resolve it.
Is it safe to use my Electrolux range while F015 is displayed?
An F015 keyboard error means the range's control system cannot reliably read inputs from the touchpad, which may prevent you from operating the oven or cooktop correctly. Using the range in this condition is not recommended because unintended behavior could occur if keypad signals are misread. It is best to resolve the error before relying on the appliance for regular cooking.
How do I fix the F015 error on my Electrolux range?
Start by unplugging the range for 30 seconds and reapplying power to see if the error clears on its own. If F015 returns, the touch panel is the most likely faulty component and should be replaced. Check the ribbon cable connecting the touch panel to the control board for damage or loose connections before replacing the panel. If a new touch panel does not resolve the issue, the main control board may also need to be inspected.
How much does it cost to repair an F015 error on an Electrolux range?
Repair costs vary depending on the root cause. A replacement touch panel typically ranges from around $50 to $150 or more for the part, depending on the specific model. If professional labor is needed, total repair costs including parts and service time can range from $150 to $350 or higher. Main control board replacement, if required, generally costs more than touch panel replacement due to the higher part price.

Related Electrolux range codes

All Electrolux range codes
View all 175 Electrolux range codes

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass