mypros+
Error code reference

Frigidaire Freezer Error Code d

Door/lid ajar alarm

Frigidaire codesFrigidaire freezer codes

Door/lid ajar alarm — display alternates between 'd' and cabinet temperature indicating the door has been open more than 5 minutes.

First step from the service manual

Close the door/lid of the freezer to return to normal operation; press ALARM RESET to silence the audible alarm.

The complete diagnostic procedure includes additional test steps, resistance specifications, wiring diagram references, and component test points.

MyPros+ Max

Get the full diagnostic procedure for d.

  • Step-by-step tests with expected resistance, voltage, and continuity values
  • Wiring diagram references and connector pinouts from the OEM service manual
  • Verified part numbers when replacement is required
Get the full procedure

$29/month · Cancel anytime · Or $9.95 3-day pass

What d means on a Frigidaire freezer

The 'd' error code on a Frigidaire freezer is a door/lid ajar alarm. When the freezer door or lid has been left open or unsealed for more than 5 continuous minutes, the control board triggers this alert. The display alternates between the letter 'd' and the current cabinet temperature, giving the technician or user a real-time view of how warm the interior has become during the open-door event. An audible alarm also sounds to draw attention to the condition.

This code is not a component failure code in the traditional sense. It is a protective notification generated by the control board's door ajar monitoring circuit, which relies on input from the door switch or lid switch. The switch sends a signal to the control board indicating whether the door is open or closed. If that signal shows an open state for longer than the 5-minute threshold, the alarm activates. The cabinet temperature displayed alongside the 'd' code helps assess whether the contents have been exposed to unsafe temperatures.

Common triggers include a door left physically open, a door that is not fully latching due to a worn gasket or obstructed seal, a misaligned door that prevents full closure, or a faulty door switch that falsely signals an open state even when the door is physically closed. Resolving the code requires either closing the door properly or addressing the underlying mechanical or electrical fault causing the open-door signal.

Source: manufacturer service documentation.

Common causes of d

  1. 01

    Door physically left open

    Wiring / connection

    The most frequent cause is the door or lid being left ajar, even slightly. Check that nothing inside the freezer is blocking the door from closing fully.

  2. 02

    Worn or damaged door gasket

    Part replacement

    A gasket that has become cracked, torn, or compressed over time may not create an airtight seal, allowing the door switch to register the door as open. Inspect the gasket around the entire perimeter for gaps or deformation.

  3. 03

    Faulty door switch

    Part replacement

    If the door is fully closed but the alarm still triggers, the door switch may be defective and sending a false open signal to the control board. Test the switch for proper continuity when the door is in the closed position.

  4. 04

    Misaligned or sagging door

    Part replacement

    A door that has shifted out of alignment due to worn hinges or heavy loading on the door bins may not close squarely against the cabinet, preventing the gasket from sealing and the switch from actuating properly.

  5. 05

    Obstructed door seal

    Wiring / connection

    Food packages, ice buildup, or frost accumulation along the door frame or gasket contact surface can prevent a full seal. Clear any obstructions and defrost the seal area if ice is present.

See the test procedure for each cause

Frequently asked questions about d

What does d mean on a Frigidaire freezer?
The 'd' code on a Frigidaire freezer is a door or lid ajar alarm. It activates when the door has been open for more than 5 minutes. The display alternates between 'd' and the current cabinet temperature, and an audible alarm sounds. Closing the door and pressing ALARM RESET will clear the alarm.
How do I fix the d alarm on my Frigidaire freezer?
Start by firmly closing the freezer door or lid and pressing the ALARM RESET button to silence the audible alert. If the alarm returns, inspect the door gasket for damage, check for any items blocking the door from fully closing, and verify that the door switch actuates properly when the door is shut. A faulty gasket or door switch will need to be replaced to permanently resolve the issue.
Will pressing ALARM RESET clear the d code permanently?
Pressing ALARM RESET silences the audible alarm and clears the active alert, but if the underlying condition persists, the code will return once the door has been open again for more than 5 minutes. Permanent resolution requires ensuring the door seals and latches correctly every time it is closed.
Is it safe to eat food from my freezer after the d alarm has triggered?
The alternating cabinet temperature display shown alongside the 'd' code can help you assess how warm the freezer interior became. Frozen food that has remained at or below 32 degrees Fahrenheit is generally considered safe. If temperatures rose significantly above that threshold for an extended period, evaluate each food item carefully for signs of thawing before consuming.
How much does it cost to repair a Frigidaire freezer showing the d code?
If the cause is simply a door left open, there is no repair cost involved. Replacing a worn door gasket typically runs in the range of $20 to $60 for the part, plus labor if a technician is hired. A door switch replacement is generally in the $10 to $40 range for the part. Hinge repair or alignment work costs vary depending on the extent of the damage and whether additional hardware is needed.

Related Frigidaire freezer codes

All Frigidaire freezer codes
View all 16 Frigidaire freezer codes

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass