mypros+
Error code reference

Frigidaire Freezer Error Code high temp

A malfunction has caused an unsafe temperature inside the freezer unit.

Avg. service call
$285
National average. Trip fee plus diagnostic plus labor. Before parts.
MyPros+ 3-day pass
$9.95
Same diagnostic steps, on your phone. Start now.
You keep in your pocket
~$275
Even before you buy the part.
Skip the service call. Fix it yourself.
Full procedure unlocks instantly.
Get Started

What the high temp error code actually means

Your Frigidaire freezer is warning you that the temperature inside has gotten too warm to safely store frozen food. This could be caused by something simple like a door left open, or it could point to a part that needs repair. Press any button on the control panel to silence the alarm, then check whether the freezer cools back down on its own.

Diagnostic procedure

The full high temp procedure

Step 1 is visible so you can confirm you are on the right page. The remaining steps, the ones that tell you whether to actually replace a part, unlock with any pass.

MyPros+ · DiagnosticsStep 1 preview
1
First diagnostic step
Press the 'set' button next to the 'alarm off' indicator on the display or press any key on the control panel to silence the alarm.
More steps, wiring diagram references, and verified part numbers
Includes expected resistance and voltage values, connector pinouts, and supersession notes for replacement parts.
Unlock high temp procedure $9.95

Or subscribe: $29/month for unlimited access to all codes plus Max AI diagnostics.

Most common causes of high temp

Ranked by how often they cause this code
  1. 1Door Left Open or Poor Door Seal
  2. 2Recent Power Outage
  3. 3Evaporator Fan Motor Failure
  4. 4Defrost System Malfunction
  5. 5Refrigerant Leak or Compressor Issue

Most DIYers save hundreds by diagnosing before ordering parts.

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass

Questions people ask about high temp

What does high temp mean on a Frigidaire freezer?
The high temp alert means the freezer's temperature monitoring system has detected that the interior temperature has risen to an unsafe level for frozen food storage. It is triggered by the unit's temperature sensor when conditions inside the cabinet exceed the acceptable threshold. The alarm can be silenced by pressing the 'set' button next to the 'alarm off' indicator or by pressing any key on the control panel. Silencing the alarm does not fix the underlying problem, so further investigation is needed if the unit does not recover its temperature.
Is my food safe after the high temp alarm went off?
Food safety depends on how high the temperature rose and for how long. The USDA recommends that frozen food kept at 40 degrees Fahrenheit or below is generally still safe. If the freezer temperature climbed above 40 degrees for more than two hours, perishable items may need to be discarded. Check for ice crystal presence in previously frozen items as a general indicator of whether full thawing occurred.
How much does it cost to repair a Frigidaire freezer showing a high temp alert?
Repair costs vary widely depending on the cause. Replacing a door gasket is typically the least expensive fix, often in the range of $20 to $75 for the part. Replacing an evaporator fan motor or defrost components generally falls in the $50 to $200 range for parts, plus labor if a technician is involved. A refrigerant leak or compressor failure represents the most costly repair, with total costs potentially ranging from $200 to $600 or more depending on the unit and service rates in your area.
How do I fix the high temp alert on my Frigidaire freezer?
Start by checking the basics: confirm the door is fully closed, inspect the door gasket for damage, and verify the freezer is plugged in and the circuit breaker has not tripped. If those checks pass, listen for the evaporator fan and monitor whether the unit cools back down to its set temperature over the next few hours. If the temperature continues to rise or the unit never recovers, a component such as the evaporator fan motor, defrost heater, or defrost thermostat may need to be tested and replaced.
Will resetting the Frigidaire freezer clear the high temp alert?
Pressing any key or the 'set' button will silence the audible alarm, but this does not reset the root cause. If the underlying issue, such as a failed fan, defrost component, or open door, is not corrected, the alert will return once temperatures rise again. The alarm will typically clear on its own once the freezer returns to a safe operating temperature after the cause is resolved.

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass