Frigidaire Freezer Error Code Sb

"Sb" on a Frigidaire freezer means Sabbath mode is active. This is not a malfunction. The mode disables the interior light and most control panel functions to comply with certain religious observance requirements. The freezer continues to cool normally, and the high temperature alarm remains active for safety.

A simple power reset by unplugging the unit may not permanently clear Sabbath mode, as the control board may restore the mode setting when power returns. The correct way to exit Sabbath mode is to use the designated button combination: press and hold "Options" and "+" simultaneously for 5 seconds. This is the only reliable method to deactivate the feature.

No parts or technician are needed to resolve the "Sb" display. Sabbath mode is a software feature built into the control board and is exited entirely through a button combination. There is no associated repair cost. If the control panel does not respond to the exit sequence at all, that could indicate a separate control board issue worth investigating, but the "Sb" code itself requires no parts or service.

To exit Sabbath mode, press and hold the "Options" button and the "+" button simultaneously for 5 seconds. The "Sb" indicator should disappear from the display and normal control panel functions will be restored. If the display does not respond, confirm you are pressing both buttons at the same time and holding for the full 5 seconds.

Yes, the freezer is completely safe and continues to operate normally in Sabbath mode. The compressor runs as usual to maintain the set temperature, and the high temperature alarm remains functional to alert you if temperatures rise to an unsafe level. The only things disabled are the interior light and most control panel input functions.