mypros+
Error code reference

Frigidaire Range Error Code F17

The Oven User Interface Board is Unable to Configure the Touch Panel.

Frigidaire codesFrigidaire range codes
Avg. service call
$285
National average. Trip fee plus diagnostic plus labor. Before parts.
MyPros+ 3-day pass
$9.95
Same diagnostic steps, on your phone. Start now.
You keep in your pocket
~$275
Even before you buy the part.
Skip the service call. Fix it yourself.
Full procedure unlocks instantly.
Get Started

What the F17 error code actually means

Your Frigidaire range is displaying F17 because the main control board is having trouble communicating with the touch panel on the front of the oven. Think of it as the control board not being able to "read" the touch surface it needs to accept your commands. This can sometimes be fixed by unplugging the range for 30 seconds and plugging it back in, but if the error returns, a part may need to be replaced.

Diagnostic procedure

The full F17 procedure

Step 1 is visible so you can confirm you are on the right page. The remaining steps, the ones that tell you whether to actually replace a part, unlock with any pass.

MyPros+ · DiagnosticsStep 1 preview
1
First diagnostic step
Check that all connectors are correctly inserted. Disconnect the Power Supply, wait for 30 seconds and reapply the Power Supply.
Unlock with pass
Unlock with pass
Unlock with pass
More steps, wiring diagram references, and verified part numbers
Includes expected resistance and voltage values, connector pinouts, and supersession notes for replacement parts.
Unlock F17 procedure $9.95

Or subscribe: $29/month for unlimited access to all codes plus Max AI diagnostics.

Most common causes of F17

Ranked by how often they cause this code
  1. 1Loose or Disconnected Wiring Connectors
  2. 2Temporary Control Board Communication Glitch
  3. 3Failed or Damaged Touch Panel
  4. 4Faulty User Interface Board
  5. 5Damaged Ribbon Cable or Wiring Harness

Most DIYers save hundreds by diagnosing before ordering parts.

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass

Questions people ask about F17

What does F17 mean on a Frigidaire range?
F17 means the oven user interface board is unable to configure the touch panel. This indicates a communication failure between the control board and the touch panel input surface. The fault can be caused by loose connectors, a failed touch panel, or a faulty user interface board. Starting with a power reset and connector inspection is the recommended first step.
Is it safe to use my Frigidaire range while the F17 code is displayed?
An active F17 fault means the control board cannot properly communicate with the touch panel, which may prevent normal oven operation or cause unpredictable control behavior. It is not advisable to continue using the range until the fault is diagnosed and resolved. Disconnect the appliance from power if you are not actively troubleshooting it.
How much does it cost to repair a Frigidaire range showing an F17 error?
Repair costs vary depending on which component has failed. If the issue is simply a loose connector, there may be no parts cost at all beyond a service call fee, which typically runs in the range of $75 to $150. Replacing a touch panel or user interface board generally adds $100 to $300 or more in parts depending on the specific model, plus labor if a technician performs the repair.
Will resetting the power clear the F17 error on my Frigidaire range?
A power reset will sometimes clear F17 if the fault was caused by a temporary communication glitch or a power disruption during startup. To reset, disconnect the range from its power supply, wait at least 30 seconds, and then reapply power. If the error returns after the reset, the underlying cause is a hardware issue that requires further diagnosis.
How do I fix the F17 error code on a Frigidaire range?
Start by disconnecting power to the range for 30 seconds and then restoring it to see if the code clears. If the error persists, inspect all wiring connectors between the touch panel and the user interface board, ensuring each one is fully and correctly seated. If connectors are secure and the fault remains, either the touch panel or the user interface board will likely need to be replaced.

Related Frigidaire range error codes

All Frigidaire range codes

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass