mypros+
Error code reference

GE Dryer Error Code 000

No errors present.

GE codesGE dryer codes

No errors present.

MyPros+ Max

Get the full diagnostic procedure for 000.

  • Step-by-step tests with expected resistance, voltage, and continuity values
  • Wiring diagram references and connector pinouts from the OEM service manual
  • Verified part numbers when replacement is required
Get the full procedure

$29/month · Cancel anytime · Or $9.95 3-day pass

What 000 means on a GE dryer

Error code 000 on a GE dryer is a status indicator, not a fault condition. When the control board displays 000, it is communicating that no error codes are currently stored in memory and that all monitored systems are reporting normal operation. This is the expected state for a dryer that is functioning correctly and has no active or pending faults logged by the electronic control system.

The 000 display typically appears when a technician or user enters the diagnostic or service mode on the dryer and queries the control board for stored fault codes. Rather than indicating a problem, it confirms that the board has not detected any out-of-range conditions in the circuits it monitors, including the thermistor, heating element circuit, motor circuit, and door switch inputs. It is the system's way of returning a clean result to a fault inquiry.

If 000 is appearing unexpectedly on the display during normal operation rather than in a diagnostic mode, the situation may warrant a closer look at the control board behavior or user interface board. In most cases, however, seeing 000 after initiating a diagnostic scan is entirely normal and simply means the dryer's self-diagnostic system found nothing to report. No repair or parts replacement is needed based on this code alone.

Source: manufacturer service documentation.

Common causes of 000

  1. 01

    Normal diagnostic mode result

    Wiring / connection

    The most common reason to see 000 is that the dryer was placed into service or diagnostic mode and returned a clean result, meaning no faults are logged. This is expected behavior and requires no action.

  2. 02

    Recent control board reset

    Wiring / connection

    If the dryer was recently unplugged or had its circuit breaker reset, the control board memory may have been cleared, erasing any previously stored codes and displaying 000 on the next diagnostic query.

  3. 03

    Intermittent fault that has cleared

    Wiring / connection

    A fault condition that was present temporarily may have resolved on its own, such as an overtemperature situation that cooled down, leaving the board with no active errors to report.

  4. 04

    User interface board querying correctly

    Wiring / connection

    The display panel is communicating properly with the main control board and returning a no-fault status. This confirms the data connection between the two boards is intact and functioning.

See the test procedure for each cause

Frequently asked questions about 000

What does 000 mean on a GE dryer?
Code 000 on a GE dryer means no error codes are currently stored in the control board's memory. It is a status response indicating that all monitored systems are operating normally. This is not a fault code and does not indicate any malfunction. No repair is needed based on this code alone.
How do I fix error code 000 on my GE dryer?
Error code 000 does not require any fix because it is not an error. It simply means the dryer's diagnostic system found no faults. If your dryer is also experiencing performance issues such as not heating or not starting, those symptoms should be investigated separately, as a different fault code may appear once diagnostics are run more thoroughly.
Is it safe to use my GE dryer when it shows code 000?
Yes, code 000 indicates no detected faults, so normal dryer operation is not affected. The dryer is safe to use. If you notice any physical symptoms like unusual noises, burning smells, or poor drying performance alongside this code, investigate those symptoms independently.
Will resetting my GE dryer clear code 000?
Code 000 does not need to be cleared because it is not a fault. If you perform a reset by unplugging the dryer or cycling the breaker, the control board memory will clear, and 000 will still appear on the next diagnostic scan since there are no faults stored. A reset has no negative impact in this situation.
How much does it cost to repair a GE dryer showing code 000?
No repair cost is associated with code 000 because it indicates no faults are present. If a technician visit was triggered by this code, expect a standard diagnostic service call fee, which typically ranges from $75 to $150 depending on your region. Any actual repair costs would depend on separate issues discovered during the visit.

Related GE dryer codes

All GE dryer codes
View all 159 GE dryer codes

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass