Skip to main contentGet Started
Error code reference
Jenn-Air Refrigerator Error Code PA
Test passed
Avg. service call
$285
National average. Trip fee plus diagnostic plus labor. Before parts.
MyPros+ 3-day pass
$9.95
Same diagnostic steps, on your phone. Start now.
You keep in your pocket
~$275
Even before you buy the part.
Skip the service call. Fix it yourself.
Full procedure unlocks instantly.
What the PA error code actually means
The PA code is a good sign. It means the refrigerator ran a self-test on a temperature sensor or a fan, and that component passed the test with no problems detected. No repair is needed when you see this code during a diagnostic check.
Diagnostic procedure
The full PA procedure
Step 1 is visible so you can confirm you are on the right page. The remaining steps, the ones that tell you whether to actually replace a part, unlock with any pass.
MyPros+ · DiagnosticsStep 1 preview
1
Confirm the fault
Power cycle the unit: switch off the breaker for 60 seconds, then restore power. If the code returns, the fault is persistent and the procedure below isolates the cause.
More steps, wiring diagram references, and verified part numbers
Includes expected resistance and voltage values, connector pinouts, and supersession notes for replacement parts.
Unlock PA procedure $9.95
Or subscribe: $29/month for unlimited access to all codes plus Max AI diagnostics.
Most common causes of PA
Ranked by how often they cause this code
- 1Diagnostic mode test completion
- 2Post-repair component verification
- 3Routine diagnostic walkthrough
Most DIYers save hundreds by diagnosing before ordering parts.
Get Started
$29/month · Cancel anytime · Or $9.95 3-day pass
Questions people ask about PA
What does PA mean on a Jenn-Air refrigerator?
PA stands for test passed and appears during the refrigerator's built-in service diagnostic mode. It confirms that the thermistor or fan component being tested completed the diagnostic cycle successfully. This is a positive result and does not indicate any problem with the refrigerator. No repair or part replacement is needed when PA is displayed.
Is it safe to use my Jenn-Air refrigerator after seeing the PA code?
Yes, the refrigerator is completely safe to use after a PA result. PA is not a warning or fault code and does not indicate any hazard or component failure. Your food and the appliance are not at risk.
How much does it cost to address a PA code on a Jenn-Air refrigerator?
There is no cost associated with a PA code because it indicates a passed test rather than a failure. If a technician ran the diagnostic during a service visit, the only cost would be the standard service call fee, which typically ranges from $75 to $150 depending on your location and provider. No parts or additional labor are needed for a PA result.
Do I need to fix anything when I see the PA code on my Jenn-Air refrigerator?
No action is required when PA appears. The code is a pass result from the diagnostic test, meaning the component under evaluation is working correctly. Simply exit the diagnostic mode and the refrigerator will resume normal operation.
Will resetting my Jenn-Air refrigerator clear the PA code?
PA will clear on its own once you exit the diagnostic test mode, so a full reset is not necessary. Because PA is not a fault code, it does not store in the error log and does not require a power cycle to clear. Exiting the service test sequence is sufficient.
78,000+ service manuals · 160,000+ error codes · 55+ brands
Get Started$29/month · Cancel anytime · Or $9.95 3-day pass