Kenmore Washer Error Code E58

E58 indicates that the motor drive system has detected an internal problem and shut down to prevent damage. The motor drive controls how power is delivered to the wash motor during operation. The first step in diagnosing this code is checking that the AC outlet voltage is between 102V and 132V AC, since out-of-range voltage can trigger this fault. If voltage is in range, the drive board or related wiring may need further inspection.

No, you should not continue operating the washer while E58 is active. The machine has detected an internal fault in the motor drive and has stopped to protect itself from further damage. Running it repeatedly while the fault is present could worsen the failure or create a safety hazard. Leave the machine powered down until the cause is diagnosed and corrected.

A reset may temporarily clear the E58 code, but if the underlying problem is not corrected, the fault will return when the machine attempts to run again. If the cause is an out-of-range supply voltage, correcting the voltage issue first and then resetting the machine may resolve it permanently. If the motor drive board has an internal failure, resetting will not fix the hardware and the code will reappear.

Some causes of E58 are DIY-friendly, such as verifying the outlet voltage with a multimeter, checking for a dedicated circuit, and inspecting wiring harness connections for corrosion or looseness. However, if the motor drive board itself has failed internally, replacement requires working around line voltage components, which carries serious shock risk. Homeowners without electrical repair experience should have a qualified technician handle drive board replacement.

Repair costs depend on the root cause. If the fix is simply correcting a circuit or outlet voltage issue, there may be little to no parts cost. If the motor drive board requires replacement, parts alone can range from roughly 80 to 250 dollars or more depending on the model, plus labor if a technician is needed. A failed drive motor will typically cost more to replace than the drive board.