mypros+
Error code reference

Monogram Microwave Error Code End

Cooking or defrost cycle is complete; oven beeps once a minute as a reminder until the door is opened or CLEAR/OFF is touched.

Monogram codesMonogram microwave codes
Avg. service call
$285
National average. Trip fee plus diagnostic plus labor. Before parts.
MyPros+ 3-day pass
$9.95
Same diagnostic steps, on your phone. Start now.
You keep in your pocket
~$275
Even before you buy the part.
Skip the service call. Fix it yourself.
Full procedure unlocks instantly.
Get Started

What the End error code actually means

"End" simply means your microwave has finished cooking or defrosting and your food is ready. The oven will beep once a minute as a reminder until you open the door or press the CLEAR/OFF button. This is completely normal and not a problem with your microwave.

Diagnostic procedure

The full End procedure

Step 1 is visible so you can confirm you are on the right page. The remaining steps, the ones that tell you whether to actually replace a part, unlock with any pass.

MyPros+ · DiagnosticsStep 1 preview
1
First diagnostic step
Open the oven door or touch CLEAR/OFF to clear the display.
Unlock with pass
Unlock with pass
Unlock with pass
More steps, wiring diagram references, and verified part numbers
Includes expected resistance and voltage values, connector pinouts, and supersession notes for replacement parts.
Unlock End procedure $9.95

Or subscribe: $29/month for all codes plus Max AI diagnostics, with 70 Max messages a day.

Most common causes of End

Ranked by how often they cause this code
  1. 1Cooking or defrost cycle completed normally
  2. 2User walked away before clearing the display
  3. 3CLEAR/OFF button not responding
  4. 4Door latch switch not signaling properly

Most DIYers save hundreds by diagnosing before ordering parts.

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass

Questions people ask about End

What does End mean on a Monogram microwave?
"End" on a Monogram microwave means the cooking or defrost cycle has finished and your food is ready. The display will remain on "End" and the oven will beep once per minute as a reminder. This is normal operation and not a fault or error condition. Open the door or press CLEAR/OFF to clear it.
Is it safe to leave food in the microwave after End appears?
The "End" display itself poses no safety concern, but leaving certain hot foods inside a closed microwave for extended periods can affect food quality and temperature. The oven is not generating any heat once "End" appears. It is best practice to remove food promptly when the cycle completes.
How much does it cost to fix a Monogram microwave that is stuck on End?
If the "End" message clears normally with the door or CLEAR/OFF button, there is no repair cost involved. If the display is genuinely stuck and a touchpad or door switch replacement is needed, parts and labor costs typically range from around $75 to $250 depending on the specific component and service rates in your area.
How do I get rid of the End display on my Monogram microwave?
You can clear the "End" display by either opening the oven door or pressing the CLEAR/OFF button on the control panel. Either action immediately stops the reminder beeping and returns the display to standby or clock mode. No reset procedure beyond these two steps is needed.
Will resetting the microwave clear the End message?
Yes, pressing CLEAR/OFF will immediately clear the "End" message and silence the reminder beeps. Opening the oven door achieves the same result. If neither action clears the display, there may be an issue with the touchpad or door switch assembly that warrants further diagnosis.

Related Monogram microwave error codes

All Monogram microwave codes

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass