Monogram Microwave Error Code RESET

RESET is a status message that appears when the microwave's clock memory has been cleared, typically after a power outage or when the unit is first plugged in. It is not a fault code indicating a broken component. The microwave is prompting you to set the clock before using the oven. Pressing CLEAR/OFF and then setting the clock will resolve the message.

The RESET message simply means the clock needs to be set and does not indicate any hazardous condition or component failure. The oven is safe, but it may not operate normally until you press CLEAR/OFF and program the clock. Cooking functions should work correctly once the clock is configured.

In the vast majority of cases, the RESET message costs nothing to resolve since it only requires pressing a button and setting the clock. If the message keeps returning without any power outage, you may need a technician to inspect the outlet, wiring, or control board, with diagnostic service calls typically ranging from $75 to $150 and control board replacement ranging from $150 to $400 depending on parts and labor.

Press the CLEAR/OFF pad to dismiss the RESET display, then use the clock-setting function to program the correct time. Once the clock is set, the microwave is ready for normal use. No tools or parts are needed for this process.

The RESET message will not clear on its own. You need to press the CLEAR/OFF pad to dismiss it and then set the clock manually. If you skip this step, the microwave may restrict access to certain functions until the clock is programmed.