mypros+
Error code reference

Samsung Refrigerator Error Code 01

Ice-maker sensor error

Avg. service call
$285
National average. Trip fee plus diagnostic plus labor. Before parts.
MyPros+ 3-day pass
$9.95
Same diagnostic steps, on your phone. Start now.
You keep in your pocket
~$275
Even before you buy the part.
Skip the service call. Fix it yourself.
Full procedure unlocks instantly.
Get Started

What the 01 error code actually means

Your Samsung refrigerator is showing an error because the thermometer inside the ice maker is not sending a usable temperature reading to the control board. This usually means a wire is loose, disconnected, or damaged somewhere between the sensor and the refrigerator's main electronics. Until this is fixed, the ice maker may stop working properly.

Diagnostic procedure

The full 01 procedure

Step 1 is visible so you can confirm you are on the right page. The remaining steps, the ones that tell you whether to actually replace a part, unlock with any pass.

MyPros+ · DiagnosticsStep 1 preview
1
First diagnostic step
Check I/M sensor connector for missing connection, contact failure, wire cut, or short-circuit.
More steps, wiring diagram references, and verified part numbers
Includes expected resistance and voltage values, connector pinouts, and supersession notes for replacement parts.
Unlock 01 procedure $9.95

Or subscribe: $29/month for unlimited access to all codes plus Max AI diagnostics.

Most common causes of 01

Ranked by how often they cause this code
  1. 1Disconnected or loose sensor connector
  2. 2Corroded or damaged connector contacts
  3. 3Cut or broken wire in the harness
  4. 4Short circuit in the sensor wiring
  5. 5Failed I/M temperature sensor

Most DIYers save hundreds by diagnosing before ordering parts.

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass

Questions people ask about 01

What does 01 mean on a Samsung refrigerator?
Error code 01 on a Samsung refrigerator indicates a problem with the ice maker temperature sensor circuit. The control board triggers this code when the sensor reports a temperature above 150°F or below -58°F, which signals a wiring or sensor fault rather than a real temperature extreme. The issue could be a loose connector, damaged wiring, or a failed sensor. Starting diagnosis at the sensor connector is the recommended first step.
Will resetting my Samsung refrigerator clear error code 01?
A reset may temporarily clear the display, but the code will return if the underlying sensor circuit problem is not corrected. The control board generates code 01 whenever it detects an out-of-range temperature reading from the I/M sensor, so the fault condition must be resolved for the error to stay cleared. Always diagnose and repair the root cause before relying on a reset.
How much does it cost to repair Samsung refrigerator error code 01?
If only the connector needs to be reseated, the repair costs nothing beyond your time. A replacement I/M temperature sensor typically runs in the range of $15 to $50 for parts. If a professional technician is needed to diagnose and replace the sensor or repair the wiring harness, total service costs including labor commonly fall in the range of $100 to $250 depending on your location and the extent of the damage.
Can I fix error code 01 on my Samsung refrigerator myself?
Yes, in many cases this repair is within reach for a careful DIYer. Begin by locating the ice maker sensor connector and checking that it is fully seated with no bent or corroded pins. If reconnecting the connector resolves the code, no parts are needed. If the sensor or wiring has failed, replacing the sensor or harness requires basic tools and some comfort working inside the freezer compartment.
Is it safe to keep using my refrigerator when error code 01 is showing?
The refrigerator's main cooling and freezer functions will generally continue to operate, but the ice maker may be disabled or behave unreliably while this code is active. There is no immediate safety hazard to food stored in the main compartments. However, leaving the fault unaddressed for an extended period could allow related wiring or control issues to develop, so prompt diagnosis is advisable.

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass