mypros+
Error code reference

Sub-Zero Wine Storage Error Code 35 3 00

Zone 3 evaporator fan open circuit.

Sub-Zero codesSub-Zero wine storage codes

Zone 3 evaporator fan open circuit.

First step from the service manual

Check control board and fan.

The complete diagnostic procedure includes additional test steps, resistance specifications, wiring diagram references, and component test points.

MyPros+ Max

Get the full diagnostic procedure for 35 3 00.

  • Step-by-step tests with expected resistance, voltage, and continuity values
  • Wiring diagram references and connector pinouts from the OEM service manual
  • Verified part numbers when replacement is required
Get the full procedure

$29/month · Cancel anytime · Or $9.95 3-day pass

What 35 3 00 means on a Sub-Zero wine storage

Error code 35 3 00 on a Sub-Zero wine storage unit indicates an open circuit condition in the Zone 3 evaporator fan. An open circuit means the control board is detecting a break in the electrical path to the fan motor, which prevents the fan from operating. The Zone 3 evaporator fan is responsible for circulating cold air produced by the evaporator coil through its designated storage zone, and when this fan fails to run, that zone loses its ability to maintain consistent temperature. The control board continuously monitors fan operation and triggers this fault when it cannot confirm proper electrical continuity or motor function.

The most common sources of this fault include a failed fan motor with an internally open winding, a wiring harness that has become disconnected or damaged, or a faulty control board that is either not sending the correct signal or misreading feedback from the fan circuit. Connector corrosion or a broken wire between the control board and the fan can also produce an open circuit reading even if the fan motor itself is functional. Diagnostic work should begin at the control board to confirm the output signal is present, then proceed to testing continuity and resistance at the fan motor terminals to determine whether the motor or the wiring is the source of the fault.

Source: manufacturer service documentation.

Common causes of 35 3 00

  1. 01

    Failed evaporator fan motor

    Part replacement

    The Zone 3 fan motor may have an open winding internally, meaning the motor has burned out or broken internally and cannot complete its circuit. Testing for continuity across the motor terminals will confirm this failure.

  2. 02

    Disconnected or damaged wiring harness

    Wiring / connection

    A connector that has come loose or a wire that has broken or chafed through between the control board and the fan can create an open circuit reading. Visually inspect the wiring path and check each connector for secure seating and corrosion.

  3. 03

    Corroded or loose connector terminals

    Wiring / connection

    Moisture inside the unit can cause connector terminals to corrode over time, increasing resistance to the point of an effective open circuit. Inspect the fan connector and control board connector pins for oxidation or looseness.

  4. 04

    Faulty control board

    Part replacement

    The control board may be failing to send the proper voltage signal to the Zone 3 fan or may be incorrectly reading the fan circuit as open. This is diagnosed after ruling out the fan motor and wiring as the source of the fault.

See the test procedure for each cause

Frequently asked questions about 35 3 00

What does 35 3 00 mean on a Sub-Zero wine_storage?
Error code 35 3 00 indicates an open circuit in the Zone 3 evaporator fan. This means the control board cannot detect a complete electrical path to the fan motor in that zone. The fan is required to circulate cooled air, so this fault can lead to temperature instability in Zone 3. Diagnosis should start at the control board and fan motor to identify the source of the open circuit.
Can I fix error code 35 3 00 myself?
Some causes, such as a disconnected wiring connector, can be corrected without specialized tools by a knowledgeable DIYer after safely unplugging the unit. However, testing fan motor continuity and control board output signals requires a multimeter and some electrical knowledge. If the fan motor or control board needs replacement, a qualified technician is recommended for those repairs.
Is it safe to keep wine in the unit while error 35 3 00 is active?
With the Zone 3 evaporator fan not operating, that zone may not maintain its set temperature reliably. Extended operation without a functioning fan can lead to temperature swings that may affect wine quality. It is advisable to move wines stored in Zone 3 to another location until the fault is resolved.
Will resetting the unit clear error code 35 3 00?
A reset may temporarily clear the displayed error, but the code will return if the underlying fault in the Zone 3 fan circuit has not been corrected. The open circuit condition must be physically repaired by addressing the fan motor, wiring, or control board before the error will stay cleared.
How much does it cost to repair error code 35 3 00 on a Sub-Zero wine storage unit?
Repair costs depend on the failed component. Replacing a wiring harness or connector is generally the least expensive repair, while a new evaporator fan motor typically falls in the range of $100 to $300 in parts. A control board replacement is the most costly option, often ranging from $300 to $600 or more in parts alone, plus labor charges from a qualified technician.

Related Sub-Zero wine storage codes

All Sub-Zero wine storage codes
View all 72 Sub-Zero wine storage codes

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass