Whirlpool Cooktop Error Code F-58 E-58

F-58 E-58 indicates a wrong or invalid configuration on the power control board, specifically classified as a Type 2 failure. The power control board has detected that its internal configuration data does not match the expected parameters for the cooktop. This fault prevents the cooktop from operating safely and requires attention to the control board.

The recommended repair is to disconnect power to the cooktop and replace the power control board. There is no field-level configuration adjustment available for this fault. If a board was recently replaced and triggered this code, verify that the replacement board is the correct part for the specific cooktop model.

Repair costs depend on the specific cooktop model and whether you hire a technician or replace the board yourself. Power control board parts typically range from $100 to $300 or more depending on the model. Adding professional labor, the total repair cost can range from $200 to $500 or higher. Getting a repair quote before proceeding is recommended, especially to weigh repair cost against replacement.

A power reset is a useful first step to confirm whether the fault is persistent, but a Type 2 configuration failure on the power control board typically does not clear with a simple reset. If the code returns after disconnecting power and restoring it, the power control board will need to be replaced. A reset alone is not a fix for this type of fault.

You should not attempt to operate the cooktop while this error code is active. The fault indicates the power control board has an invalid configuration, which means the board cannot reliably manage power distribution and burner operation. Continuing to use the cooktop in this state could pose a safety risk or cause further damage to the appliance.