Whirlpool Washer Error Code Er

The Er code on a Whirlpool washer stands for a processor reset error. It means the control board was unable to save the current cycle information when a power failure or interruption occurred. The code appears when the washer restarts and detects that its saved cycle data is missing or incomplete. It does not indicate a mechanical failure with the wash system itself.

Yes, it is generally safe to continue using the washer after clearing the Er code. The error relates to lost cycle memory rather than a hazardous mechanical or electrical fault within the appliance. That said, if the code recurs frequently, addressing the root cause promptly will help avoid unnecessary wear on the control board.

Recurring Er errors usually point to a power supply problem or a failing control board. Frequent power fluctuations, a weak circuit breaker, or a shared circuit under high load can all cause repeated processor resets. If the household power supply checks out as stable, the control board's memory components may be deteriorating and the board may need to be replaced.

Pressing STOP/CANCEL will clear the Er code from the display and allow you to restart a new cycle. If the error was caused by a one-time power interruption, this reset is typically all that is needed. However, if Er returns repeatedly, the underlying cause such as unstable power or a failing control board should be investigated.

If the issue is simply a power interruption, there is no repair cost beyond pressing STOP/CANCEL. If a replacement power cord is needed, parts and labor typically range from roughly $20 to $80. A main control board replacement, if required, generally runs between $150 and $350 or more depending on the specific model and labor rates in your area.