Model reference
Amana DCS-215-1C
Dishwasher
36 error codes21 service modes
MyPros+ Max
Diagnose your Amana DCS-215-1C.
- Step-by-step diagnostics from the service manual
- Test values, resistance specs, and wiring references
- Verified part numbers when replacement is needed
Start diagnosing
$29/month · Cancel anytime · Or $9.95 3-day pass · Plus applicable tax
Error codes (36)
CodeMeaning
1c1cShorted key detected on the control panel.1c2cKeyboard tail disconnected; keyboard loop improper value.1c31Cancel key circuit problem; cancel key improper value.1c32Cancel key circuit problem; cancel key improper value.1c4cMicro communication failure (checksum invalid).1c5cVcc or ground fault at test point.1c6cEEPROM error; no response from EEPROM after 3 tries.1c7cControl not calibrated; calibration value out of range1c81EEPROM CRC error1c8cCooking program error; CRC invalid.1d11Runaway temperature (650°F) with door unlocked; sensor resistance > 2237 ohms.1d12Runaway temperature (650°F) with door unlocked; sensor resistance > 2237 ohms.1d21Runaway temperature (950°F) with door locked; sensor resistance > 2787 ohms.1d22Runaway temperature (950°F) with door locked; sensor resistance > 2787 ohms.3d11Temperature sensor open; sensor resistance reads infinite ohms.3d12Temperature sensor open; sensor resistance reads infinite ohms.3d21Temperature sensor shorted; sensor resistance reads 0 ohms.3d22Temperature sensor shorted; sensor resistance reads 0 ohms.3d41Meat probe shorted.3d51Meat probe not calibrated.4d11Door switch position failure; door switch not closed when door is locked.4d12Door switch position failure; door switch not closed when door is locked.4d21No reverse airflow fan rotation (no or low RPM).4d31Reverse airflow fan is on when it should be off.4d41Low cooling fan rotation (RPM below threshold speed).4d51Door switch circuit failure; door switch not open or closed.4d52Door switch circuit failure; door switch not open or closed.9d11Door latch will not lock; lock switch not closed.9d12Door latch will not lock; lock switch not closed.9d21Door latch will not unlock; unlock switch not closed.View all 36 error codes
9d22Door latch will not unlock; unlock switch not closed.9d31Latch state unknown; both locked and unlocked switches indicate simultaneously.9d32Latch state unknown; both locked and unlocked switches indicate simultaneously.9d41Unlock condition detected unexpectedly.9d51Lock and unlock state both unknown.9d61Door position switch open circuit.
Service modes (21)
- 24 Hour Clock TogglePress and hold Cancel and Favorite pads for 3 to 5 seconds.
- Child Lock OutPress and hold Cancel and Cook & Hold pads for 3 seconds
- Child LockoutPress and hold Cancel and Cook & Hold pads for 3 seconds
- Clock Display TogglePress and hold Cancel and Clock pads for 3 to 5 seconds.
- Clock Display Toggle (On/Off)Press and hold Cancel and Clock pads for 3 seconds.
- Control LockoutPress the Back and Setup pads simultaneously for 5 seconds to lock.
- Control ResetPress and hold the Back and Enter pads for 5 seconds to enter SERVICE menu options
- Demo ModePress the Setup pad, then press the right ATM pad until DEMO displays
- Diagnostic Code DisplayPress and hold the 0/AUTOSET pad for 3 to 5 seconds while powering up the unit
- Diagnostic Code Display ModePress and hold the AUTOSET pad for 3 seconds at power-up
- Display TestPress and hold the Back and Enter pads for 5 seconds to enter SERVICE menu options
- Factory Default ResetPress and hold Cancel and Keep Warm pads for 3 to 5 seconds.
- Faults AccessPress and hold the Back and Enter pads for 5 seconds to enter SERVICE menu options
- Oven Temperature Adjustment1
- Quick TestPress and hold CANCEL and BROIL pads simultaneously for 3 to 5 seconds
- Quick Test ModePress and hold CANCEL and BROIL pads simultaneously for 3 seconds
- Sabbath ModeHold CLOCK pad for 3 to 5 seconds to activate Sabbath mode.
- Service ModePress the Setup pad, then press the right ATM pad until SERVICE displays
- Software Versions AccessPress and hold the Back and Enter pads for 5 seconds to enter SERVICE menu options
- Temperature Display Toggle (°F/°C)Press and hold Cancel and Bake pads for 3 seconds.
- Temperature Display Toggle (F/C)Press and hold Cancel and Bake pads for 3 to 5 seconds.
Full entry steps, exit procedures, and test sequences are available in Max.
Related Amana dishwasher models
75,000+ service documents · 20,000+ error codes · 100+ brands
Get Started$29/month · Cancel anytime · Or $9.95 3-day pass · Plus applicable tax