mypros+
Model reference

Amana ARC-1B

Range

2 documents52 error codes12 service modes

Available documentation

Tech Tip

  • Instruction Sheet - 818520212 pg
    Covers this model

Other

  • R0233001_R0233001168 pg
    Covers this model
MyPros+ Max

Diagnose your Amana ARC-1B.

  • Step-by-step diagnostics from the service manual
  • Test values, resistance specs, and wiring references
  • Verified part numbers when replacement is needed
Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass

Error codes (52)

CodeMeaning
-F2-Membrane switch failure.-F6-Microwave relay failure.:Flashing colon on display indicates a power failure has occurred.F0-E0Default F codeF1-E0Door switch malfunction.F1-E1Electronic control malfunction.F1-E2Electronic control malfunction (E2 variant).F1-E3Keypad not connected.F1-E4Keypad not connected.F1-E5Electronic control malfunction (E5 variant).F1:CFHardware configuration mismatch between electronic control board and display…F1:E4Microwave relay failure.F1:PrSoftware type mismatch in electronic control board.F1E4Microwave ACU PCBA failure.F2Touch panel failure.F2-E0Key held down too long, or key is shorted.F2-E1Key held down too long, or key is shorted.F2-E3Key held down too long, or key is shorted.F2-E4Electronic control malfunction (E3, E4, & E5 variants).F2-E5Electronic control malfunction (E3, E4, & E5 variants).F2:E1Keyboard failureF2E1Stuck key failure.F3-E0Temperature sensor opened.F3-E1Temperature sensor shorted.F3-E2Temperature sensor opened or shorted.F3-E3Meat probe shorted.F3HHumidity sensor failure.F3TTemperature sensor failure.F4-E0Self-clean latch will not lock.F4-E1Self-clean latch will not unlock.
View all 52 error codes
F4:E1Magnetron temperature sensor failure (software error).F4E4Humidity sensor error.F4E9Smart pop error.F5-E0Function not used.F5-E3Microwave cavity over temperature during cooking.F6MW relay failure (Relay 4903 issue).F6-E0Function not used.F6-E1Microwave cavity over temperature during cooking.F6:E0Communication error between display board and electronic control board.F6E0ACU PCBA communication failure.F7Power to magnetron interrupted.F8Electronic control malfunction.F8-E0Function not used (E0 variant).F8-E1Function not used (E1 variant).F8-E2Function not used (E2 variant).F8-E3Function not used (E3 variant).F8-E4Function not used (E4 variant).F8E5Exhaust air temperature sensor failure.noCFSoftware configuration error in display board.NTC OPENHF NTC thermistor is open (displays 'NTC OPEN, CALL FOR SERVICE').NTC SHORTHF NTC thermistor is shorted (displays 'NTC SHORT, CALL FOR SERVICE').SABOven is in Sabbath Mode.

Service modes (12)

  • Bake Temperature Offset Adjustment1
  • diagnostic["Plug in microwave oven or reconnect power.","Press Stop button to enter standby (displays…
  • Diagnostics Mode1. Plug in microwave oven or reconnect power and press CANCEL button to standby (':'). 2. Close…
  • Display stored fault codePress and hold "0" key for 5 seconds
  • Fahrenheit to Celsius Conversion1
  • Fault code displayPress and hold UPPER OFF key for 5 seconds.
  • Sabbath Mode Check/ExitIf oven is in Sabbath Mode, 'SAB' will appear in digital display.
  • Sabbath Mode exitOven automatically enters Sabbath Mode via user settings; "SAB" appears in digital display.
  • Self-Diagnostic / Touch Panel and PCBA Test["Press and hold the OFF/CANCEL button while opening the door.","While still holding the OFF/CANCEL…
  • Self-diagnostic test mode["Depress the CANCEL button while opening the door.","While still depressing the CANCEL button…
  • Self-diagnostic test mode (Touch Panel and Electronic Control Test)["Press and hold the OFF/CANCEL button while opening the door.","While still holding the OFF/CANCEL…
  • Touch Panel and Microcomputer Board Test (Self-Diagnostic)["Press and hold the OFF/CANCEL button while opening the door.","While still holding the OFF/CANCEL…

Full entry steps, exit procedures, and test sequences are available in Max.

Related Amana range models

75,000+ service documents · 20,000+ error codes · 100+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass