Model reference
Amana PHU185
Range
2 documents8 error codes1 service mode
Available documentation
Service Manual
- Service Manual - RM23100196 pg
Bulletin
- Service Information Bulletin CBA-238-S1 pg
MyPros+ Max
Diagnose your Amana PHU185.
- Step-by-step diagnostics from the service manual
- Test values, resistance specs, and wiring references
- Verified part numbers when replacement is needed
Start diagnosing
$29/month · Cancel anytime · Or $9.95 3-day pass
Error codes (8)
CodeMeaning
F1Indicates a failed component in the Electronic Range Control (ERC).F2Sensor resistance too high.F3Open wire lead in sensor harness, bad harness/sensor connection, or sensor…F4Sensor resistance too low (below 500 OHMS).F5Indicates a failed component in the ERC.F6Indicates a failed component in the ERC or due to fluctuations in 60 Hz power…F7Indicates a shorted or sticking contact in one or more of the function control…F8Indicates a failed component in the ERC.Service modes (1)
- Display Mode (Sales Demonstration / All Segments Test)["Clock must previously be set to time of day.","Press and hold the 'clock' button until 'time' is…
Full entry steps, exit procedures, and test sequences are available in Max.
Related Amana range models
78,000+ service manuals · 160,000+ error codes · 55+ brands
Get Started$29/month · Cancel anytime · Or $9.95 3-day pass