Model reference
ASKO T720
Dryer
4 documents8 error codes10 service modes
Available documentation
Service Manual
- ASKO Service Manual for Tumble Driers91 pg
- Service Manual for the 700 Series of Tumble Dryers91 pg
- ASKO T700 Series Dryers Service Manual65 pg
- Asko T700 - Series Dryers Service Manual65 pg
MyPros+ Max
Diagnose your ASKO T720.
- Step-by-step diagnostics from the service manual
- Test values, resistance specs, and wiring references
- Verified part numbers when replacement is needed
Start diagnosing
$29/month · Cancel anytime · Or $9.95 3-day pass
Error codes (8)
CodeMeaning
Maximum program timeThe machine has been running for its maximum allowed time of 3 hours and has…OverflowThe condensed water container is full (T780 only).OverfullThe condensation water tank is full (T780), or the bottom water container is…SensorDry clothes in drum at start, humidity sensor not installed properly in fan…Sensor faultFault in the humidity sensor; may also appear if the machine is run with…ThermistorThe thermistor may have become disconnected or have an internal fault, causing…Thermistor faultOpen or short circuit in the thermistor; the thermistor may have become…Three hoursThe machine has run the maximum drying time of three hours, indicating a…Service modes (10)
- child_safe_start["Turn the machine off then on.","Press ENTER five times, then press P3 five times (must be done…
- Child-Safe Start (T760/T780)["Turn the machine off then on.","Press ENTER five times, then press P3 five times (must be done…
- Heating power selection (T780)1
- Language Change (T760/T780)["Turn the machine off then on again.","Press ENTER five times in succession then press P1 five…
- Language change / Heating power selection (T760/T780)1
- Language change mode1
- language_change["Turn the machine off then on again.","Press ENTER five times in succession then press P1 five…
- Test program1. Ensure the machine is in its starting state (obtained by pressing the main power button). 2…
- Test program (T760/T780)1. Ensure the machine is in its starting state (obtained by pressing the main power button). 2…
- test_program["Ensure the machine is in its starting state (obtained by pressing the main power…
Full entry steps, exit procedures, and test sequences are available in Max.
Related ASKO dryer models
78,000+ service manuals · 160,000+ error codes · 55+ brands
Get Started$29/month · Cancel anytime · Or $9.95 3-day pass