Model reference
ASKO WMC64P
Washer
1 document8 error codes3 service modes
Available documentation
Service Manual
- Service and Programming Manual for ASKO WMC64P38 pg
MyPros+ Max
Diagnose your ASKO WMC64P.
- Step-by-step diagnostics from the service manual
- Test values, resistance specs, and wiring references
- Verified part numbers when replacement is needed
Start diagnosing
$29/month · Cancel anytime · Or $9.95 3-day pass
Error codes (8)
CodeMeaning
Over flow faultToo much water in the machine, or the drainage pump is running but the machine…Pressure faultIndicated if the water level drops to zero within 30 seconds of the first rinse.Security faultThe door is open.Temperature faultThe temperature has increased less than 5°C in ten minutes; the wash cycle…Thermistor faultThermistor circuit open, thermistor malfunction, or thermistor measurement…Wash motor faultNo signal from the tacho or MCU.Water inlet faultThe correct water level is not achieved within five minutes and the wash cycle…Water outlet faultThe drainage pump has been running for 3 minutes and water remains in the…Service modes (3)
- diagnostics["Enter the service menu (hold S4, power on S1, press S4 5 times within 5 seconds).","Navigate to…
- service_menu["If the machine is on, first turn off the power at the main power switch (S1).","Wait at least 5…
- user_settings_menu["If the machine is on, first turn off the power at the main power switch (S1).","Wait at least 5…
Full entry steps, exit procedures, and test sequences are available in Max.
Related ASKO washer models
78,000+ service manuals · 160,000+ error codes · 55+ brands
Get Started$29/month · Cancel anytime · Or $9.95 3-day pass