ASKO Washer Error Code Security fault

The Security fault on an Asko washer means the machine has detected that the door is open or not properly secured during operation. The washer stops automatically as a safety measure to prevent water leaks and protect the user. It can result from a door that was not latched, a faulty door switch, or a damaged latch assembly.

No, you should not attempt to bypass or ignore the Security fault. This fault is a safety interlock designed to stop the machine when the door is not properly secured. Running the washer with a compromised door latch risks water spillage, injury from the spinning drum, and potential damage to the appliance.

If the fix is simply closing the door properly, there is no cost involved. If the door latch assembly or interlock switch needs replacement, parts and labor costs typically range from $100 to $300 depending on local labor rates and the specific components required.

Start by opening and firmly closing the door until you hear it click into place, then restart the cycle. If the fault returns, inspect the door latch and strike plate for damage or misalignment. A persistently faulty door interlock switch will need to be replaced by a technician.

A reset may temporarily clear the displayed fault, but if the underlying cause such as a broken latch or faulty door switch is not addressed, the fault will return. Resolve the door issue first, then restart the machine for a lasting fix.