mypros+
Model reference

ASKO WM703

Washer

1 document14 error codes11 service modes

Available documentation

Service Manual

  • Service manual: Washing machine Type: WM7060 pg
    Covers this model
MyPros+ Max

Diagnose your ASKO WM703.

  • Step-by-step diagnostics from the service manual
  • Test values, resistance specs, and wiring references
  • Verified part numbers when replacement is needed
Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass

Error codes (14)

CodeMeaning
Engine faultNo signal from Tacho or MCU.F10OverflowF11Water outlet faultF12Water inlet faultOver flow faultToo much water in the machine, or the drain pump is running without any water…Pressour sensor faultIndicated if the water level drops to 0 within 30 seconds of the first rinsing.Pressure faultIndicated if the water level drops to 0 within 30 seconds of the first rinsing.Security faultThe door is open during operation.Temperature faultThe temperature has risen less than 5°C/41°F within 10 minutes; the wash cycle…Thermistor faultThe thermistor circuit is open, the thermistor is faulty, or the measurement…UnbalanceAfter 10 failed attempts to spin, the machine has stopped spinning because of…Wash motor faultNo signal from Tacho or MCU.Water inlet faultThe correct water level is not reached within 5 minutes and the wash cycle is…Water outlet faultThe drain pump has been activated for more than 3 minutes and water remains in…

Service modes (11)

  • Automatic door opening setting WM70.1["Turn off the machine using the main power switch.","Press the Super rinse button and then the…
  • Rinses setting WM70.1["Turn off the machine using the main power switch.","Press and hold the Delayed Start button and…
  • Service menu WM70.1["If the machine is on, turn off the power at the main switch.","Press and hold the button for…
  • Service menu WM70.2["Switch off main power.","Wait for at least 5 seconds.","Press down button S6 (or S7).","Turn on…
  • Service menu WM70.3["If the machine is on, switch the power off with the main power switch.","Press the program…
  • Settings menu WM70.2["Turn off the machine using the main power switch.","Press and hold the door opening…
  • Shop program WM70.3 (from week 737 on)["If the machine is on, turn off the power at the main power switch.","Press and hold the Start…
  • Shop program WM70.3 (up to week 736)["If the machine is on, turn off the power at the main power switch.","Press and hold the Start…
  • Total reset WM70.1["Turn off power (S1).","Wait for at least 5 seconds.","Hold door opening button (S11).","Turn on…
  • Total reset WM70.2["Turn off power (S1).","Wait for at least 5 seconds.","Hold door opening button (S14).","Turn on…
  • Total reset WM70.3["Press the DOOR OPENING BUTTON and the MAIN POWER SWITCH at the same time."]

Full entry steps, exit procedures, and test sequences are available in Max.

Related ASKO washer models

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass