mypros+
Model reference

Fisher & Paykel DD602I

Dishwasher

4 documents10 error codes8 service modes

Available documentation

Service Manual

  • Service Manual DishDrawer47 pg
    Covers this model
  • DishDrawer Service Manual27 pg
    Covers this model
  • DishDrawer Manual 599021A27 pg
    Covers this model

Installation Guide

  • DD602 / DD602I Installation Instructions24 pg
    Covers this model
MyPros+ Max

Diagnose your Fisher & Paykel DD602I.

  • Step-by-step diagnostics from the service manual
  • Test values, resistance specs, and wiring references
  • Verified part numbers when replacement is needed
Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass · Plus applicable tax

Error codes (10)

CodeMeaning
F1The flood switch has been activated, indicating a leak in the base, fill valve…F2The motor is not rotatingF3The water temperature is greater than 176°FF4No temperature increase has been recorded when the element is onF6Communications baud rate errorF7Communications time-out errorF8RAM fault on the electronic controller.U1Fill faultU2Tub open faultU3Time to fill was too short indicating water was still in the tub

Service modes (8)

  • Clearing Fault Logs["Enter Download Mode in diagnostics.","Press Keylock until a beep is sounded to clear Current…
  • Continuous Cycle Life Test Mode["Advance to this mode by pressing Power from the previous diagnostic level.","LCD shows Red…
  • Diagnostic Mode (main entry)["Ensure dishwasher is in Power Off mode (no display on LCD or badge LEDs off).","Push Keylock…
  • Display / Download Mode["Enter Diagnostic Mode as above; this is the first level.","All LEDs (except Rinse program) and…
  • Hardware Output Diagnostic Test Mode["Advance to this mode by pressing Power from the previous diagnostic level.","LCD shows Red…
  • Rinse Aid / Tub-Open Beep / Water Pressure Setup Mode["Hold the Program and Eco touch switches simultaneously for 5 seconds.","A beep is emitted and LCD…
  • Show Off Mode["Advance to this mode from Download Mode by pressing Power.","LCD shows Red backlight…
  • Temperature Display Mode["Start a wash cycle as normal.","Push and hold the Keylock button for 4 seconds to initiate…

Full entry steps, exit procedures, and test sequences are available in Max.

Related Fisher & Paykel dishwasher models

75,000+ service documents · 20,000+ error codes · 100+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass · Plus applicable tax