mypros+
Model reference

Fisher & Paykel DD603IH

Dishwasher

10 documents6 error codes18 service modes

Available documentation

Service Manual

  • DishDrawer50 pg
    Covers this model
  • DishDrawer Service Manual50 pg
    Covers this model
  • Manual 59908247 pg
    Covers this model
  • Dish Drawer Manual47 pg
    Covers this model
  • DISHDRAWER Service Manual43 pg
    Covers this model
  • DishDrawer Service Manual31 pg
    Covers this model
  • DishDrawer Service Manual50 pg
    Covers this model
  • Service Manual47 pg
    Covers this model

Service Flash

  • FisherPaykelDWBulletins119 pg
    Covers this model

Other

  • 599082c DishDrawer Phase 3 Service47 pg
    Covers this model
MyPros+ Max

Diagnose your Fisher & Paykel DD603IH.

  • Step-by-step diagnostics from the service manual
  • Test values, resistance specs, and wiring references
  • Verified part numbers when replacement is needed
Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass · Plus applicable tax

Error codes (6)

CodeMeaning
F1The flood switch has been activated for more than six seconds.F2The motor has not been sensed rotating.F3The water temperature has been sensed at greater than 85°C (185°F).F4No temperature increase has been sensed for 2 hours while the element is on.F9Electronics failure (EEPROM access error).U1Machine has failed to prime with water within approximately 3 minutes.

Service modes (18)

  • Continuous Cycle Test ModeFourth (last) level of diagnostics (press Power three times from Display/Download Mode)
  • Continuous Cycle Test Mode (Diagnostics Level 4)From diagnostics, press Power three times to reach CC level (LCD shows 'CC')
  • Diagnostic Mode - Fault Display/DownloadWith DishDrawer in Power Off mode (no display on LCD or badge LEDs off), hold Keylock and…
  • Diagnostics - Display/Download Mode1. Ensure DishDrawer is in Power Off mode (no display on LCD or badge LEDs off). 2. Press and hold…
  • Diagnostics (all levels)With the DishDrawer in Power Off mode (no display on LCD or badge LEDs off), hold the Keylock and…
  • Diagnostics EntryWith DishDrawer in Power Off mode (no display on LCD or badge LEDs off), hold Keylock and…
  • Display / Download ModeFirst level upon entering diagnostics
  • Display / Download Mode (Fault Display)["Ensure DishDrawer is in Power Off mode (no display on LCD or badge LEDs off).","Press and hold…
  • Display/Download ModeEnter diagnostics mode (hold Keylock then Start/Pause for 5 seconds in Power Off mode). The first…
  • Display/Download Mode (Diagnostics Level 1)Enter diagnostics mode
  • Fast Test CycleThird level of diagnostics (press Power twice from Display/Download Mode)
  • Fast Test Cycle (Diagnostics Level 3)From diagnostics, press Power twice to reach FC level (LCD shows 'FC'). Press Start/Pause to enter…
  • Fault Log ClearingWhile in Display/Download Mode, press Keylock until a beep sounds to clear current fault (moves…
  • Hardware Output Diagnostic Test ModeSecond level of diagnostics (press Power once from Display/Download Mode)
  • Hardware Output Diagnostic Test Mode (Diagnostics Level 2)From diagnostics, press Power once to reach HO level (LCD shows 'HO')
  • Option Adjustment ModeHold the Eco touch switch and KeyLock button simultaneously for 5 seconds (ensure Eco is pushed…
  • Show Off / Showroom Wash ModeWith DishDrawer powered up and turned on, hold Eco and Power buttons simultaneously for 5 seconds…
  • Temperature & Voltage Display ModeStart a wash cycle as normal

Full entry steps, exit procedures, and test sequences are available in Max.

Related Fisher & Paykel dishwasher models

75,000+ service documents · 20,000+ error codes · 100+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass · Plus applicable tax