mypros+
Model reference

Fisher & Paykel DD605HSS-88466A

Dishwasher

1 document14 error codes8 service modes

Available documentation

Service Manual

  • Diagnostic Manual DishDrawer™39 pg
    Covers this model
MyPros+ Max

Diagnose your Fisher & Paykel DD605HSS-88466A.

  • Step-by-step diagnostics from the service manual
  • Test values, resistance specs, and wiring references
  • Verified part numbers when replacement is needed
Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass · Plus applicable tax

Error codes (14)

CodeMeaning
F1The bottom controller flood sensor detector has been activated for more than…F2The controller has not sensed the motor rotating.F3The water temperature has been sensed as greater than 85°C (185°F).F4No temperature increase has been sensed for about 4 hours while the element is…F5Lid motor current too high during startF6Lid motors ran but did not reach stall current.F7No lid motor current detected.F8Earth leakage fault.F9Power supply / controller fault.FFTop tub not responding.U1Machine has failed to prime with water within approximately 3 minutes (fill…U2Restricted lid travelU3Water filled too quickly or tub failed to drain (not displayed to customer…U4Advisory only

Service modes (8)

  • Continuous Cycle Test Mode["Enter diagnostics (hold KEYLOCK then START/PAUSE for 5 seconds in Power Off mode).","Press POWER…
  • Diagnostics Entry (all modes)["Ensure the DishDrawer is in Power Off mode (no display on LCD or badge LEDs off).","Press and…
  • Display/Download Mode (Fault Display)["Enter diagnostics (hold KEYLOCK then START/PAUSE for 5 seconds in Power Off mode).","All LEDs &…
  • Fast Test Cycle["Enter diagnostics (hold KEYLOCK then START/PAUSE for 5 seconds in Power Off mode).","Press POWER…
  • Hardware Output Diagnostic Test Mode["Enter diagnostics (hold KEYLOCK then START/PAUSE for 5 seconds in Power Off mode).","Press POWER…
  • Option Adjustment Mode["Press POWER to turn the LCD on.","Hold the ECO button and KEYLOCK button simultaneously for 5…
  • Show Off/Showroom Wash Mode["With the DishDrawer powered up and turned on, press and hold ECO first, then POWER simultaneously…
  • Temperature & Voltage Display Mode["Start a wash cycle running.","Press and hold KEYLOCK for 4 seconds to activate keylock.","Press…

Full entry steps, exit procedures, and test sequences are available in Max.

Related Fisher & Paykel dishwasher models

75,000+ service documents · 20,000+ error codes · 100+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass · Plus applicable tax