mypros+
Model reference

Fisher & Paykel DS603HM

Dishwasher

9 documents6 error codes16 service modes

Available documentation

Service Manual

  • DishDrawer Service Manual50 pg
    Covers this model
  • Manual 59908247 pg
    Covers this model
  • Dish Drawer Manual47 pg
    Covers this model
  • DISHDRAWER Service Manual43 pg
    Covers this model
  • DishDrawer Service Manual31 pg
    Covers this model
  • Service Manual47 pg
    Covers this model

Bulletin

  • DishDrawer & Dishwasher Service Bulletin2 pg
    Covers this model

Service Flash

  • DishDrawer & Dishwasher Service Bulletin2 pg
    Covers this model
  • FisherPaykelDWBulletins119 pg
    Covers this model
MyPros+ Max

Diagnose your Fisher & Paykel DS603HM.

  • Step-by-step diagnostics from the service manual
  • Test values, resistance specs, and wiring references
  • Verified part numbers when replacement is needed
Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass · Plus applicable tax

Error codes (6)

CodeMeaning
F1The flood switch has been activated for more than six seconds.F2The motor has not been sensed rotating.F3The water temperature has been sensed at greater than 85°C (185°F).F4No temperature increase has been sensed for 2 hours while the element is on.F9Electronics failure (EEPROM access error).U1Machine has failed to prime with water within approximately 3 minutes.

Service modes (16)

  • Continuous Cycle Test ModeEnter diagnostics, press Power three times to reach 'CC' display, then press Start/Pause to enter
  • Continuous Cycle Test Mode (Diagnostics Level 4)From diagnostics, press Power three times to reach CC level (LCD shows 'CC')
  • Diagnostics - Display/Download Mode1. Ensure DishDrawer is in Power Off mode (no display on LCD or badge LEDs off). 2. Press and hold…
  • Diagnostics (all levels)With the DishDrawer in Power Off mode (no display on LCD or badge LEDs off), hold the Keylock and…
  • Diagnostics EntryWith DishDrawer in Power Off mode (no display on LCD or badge LEDs off), hold the Keylock and…
  • Display / Download ModeEnter diagnostics (Keylock + Start/Pause for 5 seconds). First level displayed
  • Display / Download Mode (Fault Display)["Ensure DishDrawer is in Power Off mode (no display on LCD or badge LEDs off).","Press and hold…
  • Display/Download ModeEnter diagnostics mode (hold Keylock then Start/Pause for 5 seconds in Power Off mode). The first…
  • Display/Download Mode (Diagnostics Level 1)Enter diagnostics mode
  • Fast Test CycleEnter diagnostics, press Power twice to reach 'FC' display, then press Start/Pause to enter
  • Fast Test Cycle (Diagnostics Level 3)From diagnostics, press Power twice to reach FC level (LCD shows 'FC'). Press Start/Pause to enter…
  • Hardware Output Diagnostic Test ModeEnter diagnostics, press Power once to reach 'HO' display, then press Start/Pause to enter
  • Hardware Output Diagnostic Test Mode (Diagnostics Level 2)From diagnostics, press Power once to reach HO level (LCD shows 'HO')
  • Option Adjustment ModePress Power, then hold the Eco touch switch and KeyLock button simultaneously for 5 seconds (ensure…
  • Show Off / Showroom Wash ModeWith DishDrawer powered up and turned on, hold Eco and Power buttons simultaneously for 5 seconds…
  • Temperature & Voltage Display ModeStart a wash cycle normally

Full entry steps, exit procedures, and test sequences are available in Max.

Related Fisher & Paykel dishwasher models

75,000+ service documents · 20,000+ error codes · 100+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass · Plus applicable tax