mypros+
Model reference

GE ZBD6600

Dishwasher

4 documents14 error codes22 service modes

Available documentation

Service Manual

  • Service Information ZBD6600/66052 pg
    Covers this model
  • TECHNICAL SERVICE GUIDE Monogram Dishwasher69 pg
    Covers this model

Training

  • Appliance Diagnostic Modes DW103 pg
    Covers this model
  • TECHNICAL SERVICE GUIDE Monogram Dishwasher69 pg
    Covers this model
MyPros+ Max

Diagnose your GE ZBD6600.

  • Step-by-step diagnostics from the service manual
  • Test values, resistance specs, and wiring references
  • Verified part numbers when replacement is needed
Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass

Error codes (14)

CodeMeaning
Door ThermistorOpen circuit door thermistor (temperature sensed below 32°F) or short circuit…Not drainingDishwasher did not drain within 5 minutes.Not fillingDishwasher did not fill after selected fill line was reached/expected.Not HeatingWater temperature rose less than 9°F in 15 minutes during wash cycle.Open or short circuit Door thermistor (Normal & Heat Dry)Temperature sensed was below 32°F or above 210°F on the door thermistor.Open or short circuit Door thermistor (Normal/Normal)Temperature sensed was below 32°F or above 210°F on the door thermistor.Oven TemperatureWater temperature sensed was greater than 180°F but less than 210°F.Over TemperatureWater temperature sensed exceeds 180°F but is less than 210°F.OverfillLeak detection switch closed or 2nd level pressure switch activated.Turbidity Sensor High SignalTurbidity sensor count was greater than 65,279 in 0.4 seconds.Turbidity Sensor Low SignalTurbidity sensor count is less than 50 in 3 seconds.Turbidity Sensor No SignalTurbidity sensor counter did not receive pulses from sensor.Turbidity Sensor No Signal & Low SignalTurbidity sensor counter did not receive pulses from sensor, or count was less…Turbidity Temp SensorTurbidity temperature thermistor was shorted, open, or constant.

Service modes (22)

  • Buzzer Silencing ModePress START/CANCEL and NORMAL WASH (or POTS NORMAL on 6905) buttons together.
  • Child Lockout ModePress and hold POTS & PANS (or POTS HEAVY on 6905) and START/CANCEL buttons together for 2 seconds…
  • Fault Code Detection["Ensure the dishwasher is in standby (off) with no program LEDs on.","Align the wash cycles and…
  • Fault Indication Mode (6400/6500)Press buttons in sequence
  • Fault Indication Mode (6600/6605 Rotary)1
  • Fault Indication Mode (6700/6900)Press buttons in sequence
  • Fault Indication Mode (6905)Press buttons in sequence
  • Fault Indication Mode (7000 Series)Press buttons in sequence
  • Field Test Cycle["Ensure the dishwasher is in standby (off) with no program LEDs on.","Align the wash cycles and…
  • Field Test Cycle (6400/6500)Press buttons in sequence
  • Field Test Cycle (6600/6605 Rotary)1
  • Field Test Cycle (6700/6900)Press buttons in sequence
  • Field Test Cycle (6905)Press buttons in sequence
  • Field Test Cycle (7000 Series)Press buttons in sequence
  • Fill Level Adjustment1
  • Relay/Triac Output Test - Latching Mode (6400/6500)Press buttons in sequence
  • Relay/Triac Output Test - Latching Mode (6600/6605 Rotary)Align WASH CYCLES and HEAT OPTIONS knob indicators pointing towards Start/Cancel button (both…
  • Relay/Triac Output Test - Latching Mode (6700/6900)Press buttons in sequence
  • Relay/Triac Output Test - Latching Mode (6905)Press buttons in sequence
  • Relay/Triac Output Test - Latching Mode (7000 Series)Press buttons in sequence
  • Relay/Triac Test["Align the wash cycles and heat options indicators on the knobs with the Start/Cancel…
  • Toggle Light Mode (7000 Series only)Hold SMART DRY and START/CANCEL buttons for 3 seconds or longer

Full entry steps, exit procedures, and test sequences are available in Max.

Related GE dishwasher models

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass