Model reference
GE JKP86
Oven
6 documents9 error codes14 service modes
Available documentation
Service Manual
- GE and Monogram 27-In. and 30-In. Wall Ovens Technical Service Guide51 pg
- GE and Monogram 27-In. and 30-In. Wall Ovens Technical Service Guide51 pg
Tech Sheet
- Appliance Diagnostic Modes Range GE Consumer & Industrial Technical Training255 pg
Training
- GE and Monogram 27-In. and 30-In. Wall Ovens Technical Service Guide51 pg
Other
- 31 41033.PDF2 pg
- tech man JTP28255 pg
MyPros+ Max
Diagnose your GE JKP86.
- Step-by-step diagnostics from the service manual
- Test values, resistance specs, and wiring references
- Verified part numbers when replacement is needed
Start diagnosing
$29/month · Cancel anytime · Or $9.95 3-day pass · Plus applicable tax
Error codes (9)
CodeMeaning
F0Shorted OFF key on the key panel.F2Oven over-temperature conditionF3Open oven sensor circuit (resistance over 2900-3000 ohms depending on model).F4Shorted oven sensor circuit (resistance under 950 ohms).F5Sensor circuit supervisor failure.F7Shorted key matrix or START key.F8EEPROM data shift failure.F9Cooling fan stalls while oven above 650°F, or other cause of open thermal…FFLoss of latch motor (door lock) safety circuit.Service modes (14)
- Control LockoutPress the 9 & 0 pad or down arrow time slew key for 3 seconds
- Glass Touch Parameter Reset (Control Panel Opened or Not Operating)1) Press Bake and Broil keys simultaneously
- Glass Touch Parameter Setting (New Part Installation)1) Reassemble control panel and return oven to normal installation
- J2S968/JGS968/JGSP48 Fault Code Recall["Press TIMER, CLOCK, and MIN DOWN (or 9) key to get Fault Codes to appear."]
- JB905/968/988 Fault Code Recall["Press TIMER and CLOCK (or 9) key to get Fault Codes to appear."]
- JP938/JP968 Cooktop Calibration Mode["Clear everything from the top of the glass.","Lock the control by pressing the LOCK key for 3…
- JP938/JP968 Cooktop Technician Mode["Lock cooktop by holding CONTROL LOCK key for 3 seconds.","Control will beep 2 times and LOCK…
- LOC REF Procedure (JCK915/JCT915/JK915/JT915/JK955/JT955/ZEK938/ZET958)["Reinitiate LOC REF procedure by pressing BAKE/BROIL simultaneously.","For digital keypads press 9…
- Oven Calibration ModePress and hold BAKE & BROIL pads until SF appears in display
- Recall Stored F-codesPress TIMER, CLOCK, and MIN DOWN (or 9) together to recall stored fault codes from EEPROM.
- Recall Stored Fault CodesPress TIMER, CLOCK, and MIN DOWN (or 9) together.
- Sales ModePress CLOCK and TIMER pads at the same time.
- Special Functions (SF) ModePress and hold BAKE and BROIL pads simultaneously for 2 seconds
- Trivection Service Mode["Disconnect main power to the oven for at least 15 seconds.","Reconnect power and enter 0803 on…
Full entry steps, exit procedures, and test sequences are available in Max.
Related GE oven models
75,000+ service documents · 20,000+ error codes · 100+ brands
Get Started$29/month · Cancel anytime · Or $9.95 3-day pass · Plus applicable tax