Model reference
GE PT925DN2BB
Oven
4 documents11 error codes8 service modes
Available documentation
Service Manual
- Technical Service Guide48 pg
- GE Profile Wall Oven PT925 Technical Service Guide62 pg
- GE Profile Wall Oven P1925 Technical Service Guide62 pg
Training
- GE Profile Wall Oven73 pg
MyPros+ Max
Diagnose your GE PT925DN2BB.
- Step-by-step diagnostics from the service manual
- Test values, resistance specs, and wiring references
- Verified part numbers when replacement is needed
Start diagnosing
$29/month · Cancel anytime · Or $9.95 3-day pass
Error codes (11)
CodeMeaning
C1Communication fail with upper relay board.C4Communication fail with lower relay board.F0Glass touch key pad failure.F2Oven temperature inside oven cavity as measured by the sensor exceeds threshold…F3Open oven sensor (over 2850 ohms).F4Shorted oven sensor (under 950 ohms).F5Display/logic board failure.F7Shorted key on glass touch keypad.F8EEPROM failure.F9Sail switch error.FCDoor lock error.Service modes (8)
- Error Code Access["Press the UPPER START pad and the CLOCK pad for 3 seconds to access ERC failure codes."]
- Factory Test ModeMust be accessed within the first 5 minutes after the unit is powered up. Press and release each…
- Failure Code RecallPress and hold the HOME and OPTIONS keys simultaneously for 3 seconds
- Sales ModeConnect unit to 120 VAC from L1-N only
- Service Mode["Press and hold the Upper BAKE pad and the BROIL pad until 'SF' appears in the display.","Then…
- Service Mode (Product TEST)1
- Special Features Mode["While the display is showing the time of day, touch the upper oven BROIL HI/LO and BAKE pads at…
- Thermostat Adjustment["Touch the BROIL HI/LO and BAKE pads at the same time until the display shows 'SF'.","Touch the…
Full entry steps, exit procedures, and test sequences are available in Max.
Related GE oven models
78,000+ service manuals · 160,000+ error codes · 55+ brands
Get Started$29/month · Cancel anytime · Or $9.95 3-day pass