Model reference
GE ZGP486LD
Range
2 documents14 error codes4 service modes
Available documentation
Service Manual
- Monogram Professional Gas Ranges Technical Service Guide86 pg
- GE Appliances Technical Service Guide - Monogram Professional Gas Ranges86 pg
MyPros+ Max
Diagnose your GE ZGP486LD.
- Step-by-step diagnostics from the service manual
- Test values, resistance specs, and wiring references
- Verified part numbers when replacement is needed
Start diagnosing
$29/month · Cancel anytime · Or $9.95 3-day pass
Error codes (14)
CodeMeaning
C1Communication fail with Main Relay Board.C2Communication fail with Upper Temp Encoder.C3Communication fail with Upper Mode Encoder.C4Communication fail with AuxC5Communication fail with Lower Temp Encoder.C6Communication fail with Lower Mode Encoder.F2Oven temperature inside cavity as measured by sensor over 650°F unlatched or…F3Open oven sensor (over 2900 ohms).F4Shorted oven sensor (under 950 ohms).F6Range lockout switch issues.F7Shorted key.F8EEPROM data shift failure.F9Cooling fan stalls or other cause of open sail switch (reed switch).FCDoor latch error.Service modes (4)
- F-Code Access (via Factory Test Mode)["Enter Factory Test Mode (press and hold PUSH TO SELECT knob for 3 seconds within first 2 minutes…
- Factory Test ModeWithin the first 2 minutes of power up (before any other selections are made), press and hold the…
- Oven Thermostat Adjustment (Offset Mode)["Push and hold the TIMER button and Mini-Knob at the same time for 4 seconds until the display…
- Special Features (SF) ModePush and hold the TIMER button and Mini-Knob at the same time for 4 seconds until the display shows…
Full entry steps, exit procedures, and test sequences are available in Max.
Related GE range models
78,000+ service manuals · 160,000+ error codes · 55+ brands
Get Started$29/month · Cancel anytime · Or $9.95 3-day pass