mypros+
Model reference

GE GNE25JMKLFES

Refrigerator

4 documents5 error codes16 service modes

Available documentation

Service Manual

  • Technical Service Guide77 pg
    Covers this model
  • Technical Service Guide78 pg
    Covers this model
  • Technical Service Guide 2017 & 2018 19, 21, 25, 27 Cu. Ft. Bottom-Freezer Refrigerators78 pg
    Covers this model
  • Technical Service Guide81 pg
    Covers this model
MyPros+ Max

Diagnose your GE GNE25JMKLFES.

  • Step-by-step diagnostics from the service manual
  • Test values, resistance specs, and wiring references
  • Verified part numbers when replacement is needed
Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass

Error codes (5)

CodeMeaning
888Demo Mode is activebPBypass plug is installed in place of a water filter.ERRNo water filter or no bypass plug is installed; ice and water systems are…LEAKA water leak has been detected by the RFID system; ice and water systems are…SASabbath Mode is active

Service modes (16)

  • Cooling System OffPress and hold both Fridge and Freezer pads until the display shows OFF.
  • Demo ModePress Door Alarm, Freezer, and Fridge pads simultaneously for 5 seconds
  • Sabbath ModePress and hold the Door Alarm and Water Filter pads until the display shows SA briefly before going…
  • Service ModePress and hold 'Door Alarm', 'Freezer', and 'Turbo Cool' pads simultaneously for 3 seconds
  • t1 - Demo Mode (Service Mode)Enter Service Mode, navigate to t1, press Door Alarm to execute.
  • t10 - Enter Pre-ChillEnter Service Mode, navigate to t10, press Door Alarm to execute.
  • t11 - Toggle DefrostEnter Service Mode, navigate to t11, press Door Alarm to execute.
  • t12 - Refrigerator ResetEnter Service Mode, navigate to t12, press Door Alarm to execute.
  • t13 - Test Mode ExitEnter Service Mode, navigate to t13, press Door Alarm to execute.
  • t14 - Celsius/Fahrenheit SelectorEnter Service Mode, navigate to t14, press Door Alarm to execute.
  • t2 - Communication TestEnter Service Mode, navigate to t2, press Door Alarm to execute.
  • t3 - Temperature Control Board Display Self-TestEnter Service Mode, navigate to t3, press Door Alarm to execute.
  • t4 - Sensor Self-TestEnter Service Mode, navigate to t4, press Door Alarm to execute.
  • t7 - Damper TestEnter Service Mode, navigate to t7, press Door Alarm to execute.
  • t8 - Fan Speed TestEnter Service Mode, navigate to t8, press Door Alarm to execute.
  • t9 - Cooling System TestEnter Service Mode, navigate to t9, press Door Alarm to execute.

Full entry steps, exit procedures, and test sequences are available in Max.

Related GE refrigerator models

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass