Model reference

Jenn-Air JJW3830LM01

Oven

6 documents22 error codes2 service modes

Available documentation

Tech Sheet

Tech Sheet W11399179 REVA2 pg
Covers this model

Service Manual

Tech Manual76 pg
Covers this model

Service Flash

Service Pointer - W11815938 - Rev A - Wall Oven F8E0 Error Code6 pg
Covers this model
Technical Service Pointer - W11803872 Rev B - Built In Oven Loose UI Board11 pg
Covers this model

Installation Guide

Installation Instruction40 pg
Covers this model

Quick Reference

Quick Start Guide2 pg
Covers this model

MyPros+ Max

Diagnose your Jenn-Air JJW3830LM01.

Step-by-step diagnostics from the service manual
Test values, resistance specs, and wiring references
Verified part numbers when replacement is needed

Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass

M+

M+ Max·Jenn-Air Oven

F1E0 on my Jenn-Air JJW3830LM01

M+

Oven user interface failure.

From Tech Sheet W13879565, p.17:

1.Access service mode to confirm the active fault code and read stored error history.

2.Measure control board supply voltage at test points. Expected: 12 VDC and 5 VDC.

3.Inspect all connectors on the main control for corrosion or backed-out pins.

Part WPW10804018

Electronic control board

Error codes (22)

CodeMeaning

F1E0Oven user interface failure.F1E1Internal oven appliance manager error.F2E0Keypad disconnected.F2E1Stuck/Shorted keypad.F3E0Main oven sensor open or shorted.F3E1Bottom oven sensor open or shorted.F3E3Meat probe connector jack or meat probe shorted.F5E0Door and latch switch do not agree (main/upper oven).F5E1Latch not operating (main/upper oven).F5E3Door and latch switch do not agree (lower oven).F5E4Latch not operating (lower oven).F6E0Oven user interface lost communication.F6E1Over temperature (main/upper oven).F6E3Over temperature (lower oven).F6E4User interface/Appliance manager state status mismatch.F6E6Oven appliance manager lost communication (main/upper oven).F6E9Oven appliance manager lost communication (lower oven).F8E0Low fan speed underspeed.F8E1Low fan speed overspeed.F8E2High fan speed underspeed.F8E3High fan speed overspeed.F9E0Product not wired correctly (neutral connection switched with L1 or L2).

Service modes (2)

DiagnosticsSingle Ovens
Diagnostics mode["Single Ovens

Full entry steps, exit procedures, and test sequences are available in Max.

Related Jenn-Air oven models

78,000+ service manuals · 160,000+ error codes · 55+ brands

$29/month · Cancel anytime · Or $9.95 3-day pass