mypros+
Model reference

Jenn Air JGS8850ADB

Range

5 documents18 error codes4 service modes

Available documentation

Service Manual

  • Gas Slide-In Range Service Manual44 pg
    Covers this model
  • Gas Slide-In Range Service Manual44 pg
    Covers this model
  • JENN AIR Gas Slide In Range Service Manual JGS8750ADB S W JGS8850ADB Q S W44 pg
    Covers this model
  • Service Manual - 1602208944 pg
    Covers this model

Tech Sheet

  • Technical Information⎯Gas Slide-In Range JGS8750ADB/S/W JGS8850ADB/Q/S/W10 pg
    Covers this model
MyPros+ Max

Diagnose your Jenn Air JGS8850ADB.

  • Step-by-step diagnostics from the service manual
  • Test values, resistance specs, and wiring references
  • Verified part numbers when replacement is needed
Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass

Error codes (18)

CodeMeaning
F0-0No fault detected.F1-1Oven temperature above 650°F (343°C) in bake mode.F1-3Oven temperature above 950°F (510°C) during a clean cycle.F1-5Cancel pad not responding.F1-7Membrane disconnected.F1-8Shorted key (pad) in membrane switch.F1-9Internal control communication errors.F1-ALock/unlock switch state not advancing to control.F1-COven door switch state not advancing to control.F1-EControl not calibrated.F1-FJumper not removed from printed circuit board (PCB).F1-HEEPROM error.F1-NInternal voltage for slave micro incorrect.F3-1Open or shorted oven sensor.F8Shorted meat probe.F9-1Oven door will not lock.F9-2Oven door will not unlock.F9-3Oven door status is both locked and unlocked.

Service modes (4)

  • Quick Test Mode1
  • Quick Test Mode (EOC II)["Press and hold the Cancel and Broil pads simultaneously for 3 seconds at power-up, or within 5…
  • Setup Options (Factory Default Change)1
  • View Most Recent Fault Code1

Full entry steps, exit procedures, and test sequences are available in Max.

Related Jenn Air range models

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass